Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHusqvarna Leaf Blower Fuel Tank Replacement #528907401
Husqvarna Leaf Blower Fuel Tank Replacement #528907401
Skill Level
Total Parts Cost
$107.10Estimated Savings
$112.5002:20
- Description
This video provides step-by-step repair instructions for replacing the fuel tank on a Husqvarna leaf blower. The most common reasons for replacing the fuel tank are if the tank is damaged or leaking.
All of the information in this fuel tank replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
All of the information in this fuel tank replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
Step By Step Instructions
1
Before you replace the fuel tank assembly on your leaf blower you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and empty the old fuel tank.
2
Note the orientation of the primer and intake hoses then disconnect them from the carburetor.
3
Set the leaf blower on its side and use a t-27 torx bit or a flat-head screwdriver to unthread the screws securing the tank to the base.
4
Slide the old tank assembly out.
5
Before you install the new fuel tank assembly transfer the retaining clamp from the old primer hose to the new one.
6
Slide the new assembly into place on the base and replace the screws to secure.
7
Connect the intake and primer hoses to the appropriate ports on the carburetor.
8
Reattach the wire and boot to the spark plug fill the new tank with fuel and your leaf blower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the fuel tank on a Husqvarna leaf blower. The most common reasons for replacing the fuel tank are if the tank is damaged or leaking.
All of the information in this fuel tank replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
All of the information in this fuel tank replacement video is applicable to following brands: Husqvarna
Tools used: T-27 Torx bit, flat head screwdriver
Step-By-Step Instructions
1
Before you replace the fuel tank assembly on your leaf blower you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and empty the old fuel tank.
2
Note the orientation of the primer and intake hoses then disconnect them from the carburetor.
3
Set the leaf blower on its side and use a t-27 torx bit or a flat-head screwdriver to unthread the screws securing the tank to the base.
4
Slide the old tank assembly out.
5
Before you install the new fuel tank assembly transfer the retaining clamp from the old primer hose to the new one.
6
Slide the new assembly into place on the base and replace the screws to secure.
7
Connect the intake and primer hoses to the appropriate ports on the carburetor.
8
Reattach the wire and boot to the spark plug fill the new tank with fuel and your leaf blower should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com