Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Dryer Replace Temperature Switch #W10661453
Whirlpool Electric Dryer Replace Temperature Switch #W10661453
Skill Level
Total Parts Cost
$7.90Estimated Savings
$112.5002:10
- Description
This video provides step-by-step repair instructions for replacing the temperature switch on a Whirlpool electric dryer. The most common reason for replacing the switch is if the dryer is too hot.
This dryer switch replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This dryer switch replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the temperature switch in your dryer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screw securing the control panel.
3
Insert a putty knife under the control panel to release the two spring clips securing the panel.
4
Pull the panel forward to release it.
5
Disconnect the temperature switch wire connecter.
6
Remove the selector knob.
7
You can now lift up the locking arm and rotate the old switch to remove.
8
Install the new temperature switch by inserting it into the control panel then rotate until the locking arm snaps into place.
9
Align the knob on the stem of the new switch.
10
Connect the wire connecter.
11
Realign the control panel on the upper rear panel, making sure the tabs are inserted into the slots in the main top.
12
Push the control panel down to snap the spring clips into place.
13
Rethread the rear screw to secure.
14
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the temperature switch on a Whirlpool electric dryer. The most common reason for replacing the switch is if the dryer is too hot.
This dryer switch replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This dryer switch replacement video is applicable to the following brands:
Whirlpool, Admiral, Amana, Crosley, Estate, Inglis, Kenmore, KitchenAid, Magic Chef, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the temperature switch in your dryer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screw securing the control panel.
3
Insert a putty knife under the control panel to release the two spring clips securing the panel.
4
Pull the panel forward to release it.
5
Disconnect the temperature switch wire connecter.
6
Remove the selector knob.
7
You can now lift up the locking arm and rotate the old switch to remove.
8
Install the new temperature switch by inserting it into the control panel then rotate until the locking arm snaps into place.
9
Align the knob on the stem of the new switch.
10
Connect the wire connecter.
11
Realign the control panel on the upper rear panel, making sure the tabs are inserted into the slots in the main top.
12
Push the control panel down to snap the spring clips into place.
13
Rethread the rear screw to secure.
14
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
01:53
Part Replacement
Whirlpool Gas Dryer Temperature Select Switch Replacement #W11050715
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com