Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Alpha Front-Load Washer Detergent Dispenser Replacement #W10575334
Whirlpool Alpha Front-Load Washer Detergent Dispenser Replacement #W10575334
Skill Level
Total Parts Cost
$133.56Estimated Savings
$112.5004:40
- Description
This video provides step-by-step instructions for replacing the detergent dispenser on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reasons for replacing the dispenser is if the detergent is not entering the drum properly.
All of the information in this detergent dispenser replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx Bit, 1/4" socket
All of the information in this detergent dispenser replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx Bit, 1/4" socket
Step By Step Instructions
1
Before you replace the detergent dispenser in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Next, pull the detergent dispenser drawer out and depress the retaining tab to fully detach.
5
Unthread the three screws securing the dispenser housing.
6
The front screws require a t-20 torx bit.
7
Slide the dispenser back to detach it from the side panel
8
Release the clamp to detach the large outlet hose from the dispenser.
9
Now note the orientation of the two inlet hoses then release the clamps and pull the hoses off.
10
Before you install the new detergent dispenser remove the dispenser drawer.
11
Attach the two inlet hoses to the appropriate ports on the new dispenser and secure them with the clamps.
12
Align the outlet hose on the port and secure it with the clamp.
13
Insert the mounting tab into the slot in the side panel and push the dispenser forward to lock it into position.
14
Thread and tighten the three screws to secure the housing.
15
Depress the tabs to release the handle from the old drawer.
16
Snap the handle into place on the new drawer and fully seat the drawer in the new dispenser housing.
17
Realign the top panel and slide it into position.
18
Replace the screws in the rear.
19
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the detergent dispenser on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reasons for replacing the dispenser is if the detergent is not entering the drum properly.
All of the information in this detergent dispenser replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx Bit, 1/4" socket
All of the information in this detergent dispenser replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx Bit, 1/4" socket
Step-By-Step Instructions
1
Before you replace the detergent dispenser in your washer be sure to unplug the power cord.
2
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Next, pull the detergent dispenser drawer out and depress the retaining tab to fully detach.
5
Unthread the three screws securing the dispenser housing.
6
The front screws require a t-20 torx bit.
7
Slide the dispenser back to detach it from the side panel
8
Release the clamp to detach the large outlet hose from the dispenser.
9
Now note the orientation of the two inlet hoses then release the clamps and pull the hoses off.
10
Before you install the new detergent dispenser remove the dispenser drawer.
11
Attach the two inlet hoses to the appropriate ports on the new dispenser and secure them with the clamps.
12
Align the outlet hose on the port and secure it with the clamp.
13
Insert the mounting tab into the slot in the side panel and push the dispenser forward to lock it into position.
14
Thread and tighten the three screws to secure the housing.
15
Depress the tabs to release the handle from the old drawer.
16
Snap the handle into place on the new drawer and fully seat the drawer in the new dispenser housing.
17
Realign the top panel and slide it into position.
18
Replace the screws in the rear.
19
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
01:41
Part Replacement
Whirlpool Alpha Front-Load Washer Leveling Leg Replacement #W10888529
03:36
Part Replacement
Whirlpool Alpha Front-Load Washer Drain Pump Replacement #WPW10425238
03:37
Part Replacement
Whirlpool Alpha Front-Load Washer Heating Element Replacement #W10576399
04:00
Part Replacement
Whirlpool Alpha Front-Load Washer Control Board Replacement #W10920600
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com