Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Alpha Front-Load Washer Heating Element Replacement #W10576399
Whirlpool Alpha Front-Load Washer Heating Element Replacement #W10576399
Skill Level
Total Parts Cost
$61.48Estimated Savings
$112.5003:37
- Description
This video provides step-by-step instructions for replacing the heating element on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the heating element is if the water is not getting hot enough.
All of the information in this heating element replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx bit, 1/4" socket
All of the information in this heating element replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx bit, 1/4" socket
Step By Step Instructions
1
Before you replace the heating element in your washer be sure to unplug the power cord.
2
Using a t-20 torx bit or a quarter-inch socket or nut driver, unthread the screws securing the rear access panel.
3
Loosen the center top screw, but don’t remove it.
4
Now slide the panel to the right to remove and set it aside.
5
Note the orientation of the heating element wires then disconnect them.
6
Use a t-20 torx bit to unthread the screw to release the guard.
7
Use a 10mm socket to loosen the heating element mounting nut.
8
Using a flat-head screwdriver, tap the bolt to push it back.
9
You should now be able to pry the old heating element out of the housing.
10
Before you install the new heating element make sure the mounting nut is loose.
11
Now insert the heating element into the housing and through the bracket.
12
Push firmly into place then tighten the mounting nut.
13
Reposition the guard and secure it with the screw.
14
Connect the wires to the appropriate terminals on the new element.
15
Hook the rear access panel on the top screw and slide it to the left.
16
Tighten the screw.
17
Rethread and tighten the remaining mounting screws.
18
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the heating element on a Whirlpool front loading washing machine, model #WFW85HEFW0. The most common reason for replacing the heating element is if the water is not getting hot enough.
All of the information in this heating element replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx bit, 1/4" socket
All of the information in this heating element replacement video is applicable to the following brands: Whirlpool
Tools used: pliers, T-20 Torx bit, 1/4" socket
Step-By-Step Instructions
1
Before you replace the heating element in your washer be sure to unplug the power cord.
2
Using a t-20 torx bit or a quarter-inch socket or nut driver, unthread the screws securing the rear access panel.
3
Loosen the center top screw, but don’t remove it.
4
Now slide the panel to the right to remove and set it aside.
5
Note the orientation of the heating element wires then disconnect them.
6
Use a t-20 torx bit to unthread the screw to release the guard.
7
Use a 10mm socket to loosen the heating element mounting nut.
8
Using a flat-head screwdriver, tap the bolt to push it back.
9
You should now be able to pry the old heating element out of the housing.
10
Before you install the new heating element make sure the mounting nut is loose.
11
Now insert the heating element into the housing and through the bracket.
12
Push firmly into place then tighten the mounting nut.
13
Reposition the guard and secure it with the screw.
14
Connect the wires to the appropriate terminals on the new element.
15
Hook the rear access panel on the top screw and slide it to the left.
16
Tighten the screw.
17
Rethread and tighten the remaining mounting screws.
18
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos
04:40
Part Replacement
Whirlpool Alpha Front-Load Washer Detergent Dispenser Replacement #W10575334
03:36
Part Replacement
Whirlpool Alpha Front-Load Washer Drain Pump Replacement #WPW10425238
04:00
Part Replacement
Whirlpool Alpha Front-Load Washer Control Board Replacement #W10920600
01:41
Part Replacement
Whirlpool Alpha Front-Load Washer Leveling Leg Replacement #W10888529
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com