DescriptionThis video provides step-by-step repair instructions for replacing the outer door assembly on a Whirlpool electric dryer (model #WED85HEFW0). The most common reason for replacing the door assembly is if it is damaged.
This door replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, Phillips-head screwdriver, 1/4" socket
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
To replace the outer door assembly on your dryer…
6
…use a t-25 torx bit to remove the four mounting screws securing the door hinge to the front panel.
7
With the screws unthreaded, lift the door up to detach it from the door frame…
8
…and place the door on a towel or blanket.
9
Using a phillips-head screwdriver, unthread the ten screws holding the inner and outer door assemblies together.
10
Separate the two assemblies.
11
Install the new outer door assembly…
12
…by aligning it with the inner door assembly.
13
Thread and tighten the ten screws.
14
Hook the door hinge onto the front panel door frame…
15
…then thread and tighten the mounting screws.
16
At repairclinic – we make fixing things easy.
17
Thank you for supporting the production of these videos by purchasing your parts from our website.