Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Alpha Electric Dryer Control Board Replacement #W10875487
Whirlpool Alpha Electric Dryer Control Board Replacement #W10875487
Skill Level
Total Parts Cost
$215.04Estimated Savings
$112.5003:04
- Description
This video provides step-by-step repair instructions for replacing the control board on a Whirlpool electric dryer (model #WED85HEFW0). The most common reason for replacing the board is if the dryer will not work at all.
This board replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, Phillips-head screwdriver, 1/4" socket
Don't forget to like and comment on this video and subscribe to our channel!
This board replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, Phillips-head screwdriver, 1/4" socket
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the control board in your dryer…
6
…be sure to unplug the power cord.
7
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel and bracket to the rear panel.
8
Slide the top panel back and lift up to detach.
9
Note the orientation of the wires connected to the control board…
10
…then disconnect them.
11
Unthread the two screws securing the control board mounting bracket to the frame.
12
Unthread the screw securing the board to the bracket.
13
Rotate the bracket, depress the retaining tab, and slide the old board forward to detach.
14
Install the new control board…
15
…by aligning it on the mounting bracket and sliding it back to lock it into place.
16
Thread the screw to secure.
17
Replace the screws to secure the bracket to the frame.
18
Now connect the wire connecters to the appropriate terminals on the new board.
19
Realign the top panel and bracket then slide into position.
20
Rethread the rear screws and tighten.
21
With the repair completed…
22
…plug the power cord back in…
23
…and your dryer should be ready for use.
24
At repairclinic – we make fixing things easy.
25
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step repair instructions for replacing the control board on a Whirlpool electric dryer (model #WED85HEFW0). The most common reason for replacing the board is if the dryer will not work at all.
This board replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, Phillips-head screwdriver, 1/4" socket
Don't forget to like and comment on this video and subscribe to our channel!
This board replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: T-25 Torx bit, Phillips-head screwdriver, 1/4" socket
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the control board in your dryer…
6
…be sure to unplug the power cord.
7
Use a quarter-inch socket or nut driver to unthread the rear screws securing the top panel and bracket to the rear panel.
8
Slide the top panel back and lift up to detach.
9
Note the orientation of the wires connected to the control board…
10
…then disconnect them.
11
Unthread the two screws securing the control board mounting bracket to the frame.
12
Unthread the screw securing the board to the bracket.
13
Rotate the bracket, depress the retaining tab, and slide the old board forward to detach.
14
Install the new control board…
15
…by aligning it on the mounting bracket and sliding it back to lock it into place.
16
Thread the screw to secure.
17
Replace the screws to secure the bracket to the frame.
18
Now connect the wire connecters to the appropriate terminals on the new board.
19
Realign the top panel and bracket then slide into position.
20
Rethread the rear screws and tighten.
21
With the repair completed…
22
…plug the power cord back in…
23
…and your dryer should be ready for use.
24
At repairclinic – we make fixing things easy.
25
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Parts Needed
Main Control Board
$215.04
Total$0.00
Related Articles & Videos
10:42
Part Replacement
Whirlpool Alpha Electric Dryer Heating Element Replacement #WP8544771
09:26
Part Replacement
Whirlpool Alpha Electric Dryer Motor Pulley Replacement #WP8066184
00:47
Part Replacement
Whirlpool Alpha Electric Dryer Drying Rack Installation #W10886894
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com