Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Broil Burner Tube Replacement #W11233678 
KitchenAid Convection Gas Range Broil Burner Tube Replacement #W11233678
Skill Level
Total Parts Cost
$56.33Estimated Savings
$112.5003:22
- Description
This video provides step-by-step repair instructions for replacing the broil burner tube on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the tube is if the broiler is not working.
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Broil Burner Tube
3
You will need a 5/16th inch socket or nut driver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Fully open the oven door and rotate both door hinge locks back.
9
Heavy
10
Partially close the door, then lift and pull the door toward you to remove.
11
With the handle side down, set the door on a blanket.
12
Slide out the oven racks.
13
Unthread the front screws securing the broier tube and shield.
14
Remove the shield.
15
Disconnect the broil element spark electrode wire to fully release the broiler tube assembly.
16
Make sure the wire doesn't slip behind the oven's back panel.
17
Use a 5/16th inch socket or nut driver to unthread the two screws to release the spark electrode.
18
Align the spark electrode and secure it with the screws.
19
Confirm that the new tube's air shutter is opened the same amount as the old shutter.
20
Reconnect the broil spark electrode wire.
21
Align the shield and prosition the broiler tube assembly, then thread and tighten the front screw to secure.
22
Slide the oven racks into place.
23
Reinstall the oven door by inerting the door hinges into the hinge slots at a forty-five degree ange.
24
Lower the door to its fully open position, then rotate the hinge locks forward.
25
Turn the gas supply back on, plug the power cord back in or restore the power supply, and the gas range shoud be ready for use.
Description
This video provides step-by-step repair instructions for replacing the broil burner tube on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the tube is if the broiler is not working.
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Broil Burner Tube
3
You will need a 5/16th inch socket or nut driver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Fully open the oven door and rotate both door hinge locks back.
9
Heavy
10
Partially close the door, then lift and pull the door toward you to remove.
11
With the handle side down, set the door on a blanket.
12
Slide out the oven racks.
13
Unthread the front screws securing the broier tube and shield.
14
Remove the shield.
15
Disconnect the broil element spark electrode wire to fully release the broiler tube assembly.
16
Make sure the wire doesn't slip behind the oven's back panel.
17
Use a 5/16th inch socket or nut driver to unthread the two screws to release the spark electrode.
18
Align the spark electrode and secure it with the screws.
19
Confirm that the new tube's air shutter is opened the same amount as the old shutter.
20
Reconnect the broil spark electrode wire.
21
Align the shield and prosition the broiler tube assembly, then thread and tighten the front screw to secure.
22
Slide the oven racks into place.
23
Reinstall the oven door by inerting the door hinges into the hinge slots at a forty-five degree ange.
24
Lower the door to its fully open position, then rotate the hinge locks forward.
25
Turn the gas supply back on, plug the power cord back in or restore the power supply, and the gas range shoud be ready for use.
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com