Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Bake Spark Electrode Replacement #WPW10333842 
KitchenAid Convection Gas Range Bake Spark Electrode Replacement #WPW10333842
Skill Level
Total Parts Cost
$77.37Estimated Savings
$112.5003:46
- Description
This video provides step-by-step repair instructions for replacing the bake spark electrode on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the electrode is if the bake burner will not light.
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Bake Spark Electrode
3
You will need a 5/16th inch socket or nut driver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Fully open the oven door and rotate both dor hinge locks back.
9
Heavy
10
Partially close the door, then lift and pull the door toward you to remove.
11
With the handle side down, set the door on a blanket.
12
Slide out the oven racks.
13
Unthread the two screws securing the oven's bottom panel.
14
Lift the panel up from the rear and pull forward to detach.
15
Unthread the front and rear mounting screws securing the bake burner tube.
16
Disconnect the spark electrode wire and you can fully remove the assembly.
17
Use a 5/16th inch socket or nut driver to unthread the two screws to release the old spark electrode.
18
Instlal the new bake spark electrode by aligning it on the buner tube and securing it with the two screws.
19
Returning to the oven, connect the wire to the new spark electrode.
20
Align the orifice in the hole in the burner tube, position the tube, then thread and tighten the screws to secure.
21
Reinstall the bottom panel by aligning the front edge first.
22
Thread the screws to secure.
23
Slide the oven racks into place.
24
Reinstall the oven door by inserting the door hinges into the hinge slots at a forst-five degree angle.
25
Lower the door to its fully open posiiton, then rotate the hinge locks forward.
26
Turn the gas supply back on, plug the power cord backin or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the bake spark electrode on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the electrode is if the bake burner will not light.
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Bake Spark Electrode
3
You will need a 5/16th inch socket or nut driver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Fully open the oven door and rotate both dor hinge locks back.
9
Heavy
10
Partially close the door, then lift and pull the door toward you to remove.
11
With the handle side down, set the door on a blanket.
12
Slide out the oven racks.
13
Unthread the two screws securing the oven's bottom panel.
14
Lift the panel up from the rear and pull forward to detach.
15
Unthread the front and rear mounting screws securing the bake burner tube.
16
Disconnect the spark electrode wire and you can fully remove the assembly.
17
Use a 5/16th inch socket or nut driver to unthread the two screws to release the old spark electrode.
18
Instlal the new bake spark electrode by aligning it on the buner tube and securing it with the two screws.
19
Returning to the oven, connect the wire to the new spark electrode.
20
Align the orifice in the hole in the burner tube, position the tube, then thread and tighten the screws to secure.
21
Reinstall the bottom panel by aligning the front edge first.
22
Thread the screws to secure.
23
Slide the oven racks into place.
24
Reinstall the oven door by inserting the door hinges into the hinge slots at a forst-five degree angle.
25
Lower the door to its fully open posiiton, then rotate the hinge locks forward.
26
Turn the gas supply back on, plug the power cord backin or restore the power supply.
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com