Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Anti-Tip Bracket Replacement #WP3801F656-51
Kitchenaid Double Oven Gas Range Anti-Tip Bracket Replacement #WP3801F656-51
Skill Level
Total Parts Cost
$9.83Estimated Savings
$112.5002:34
- Description
This video provides step-by-step instructions for replacing the anti-tip bracket on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the bracket is if the range is not properly secured.
All of the information in this bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Anncr: since repair clinic encourages you to perform this procedure safely, a warning icon will appear when you should use caution.
2
Before you install an anti-tip bracket for your double oven gas range…
3
…make sure the power cord is unplugged and the range has been moved out of the way.
4
Be aware, you may need to shut off the gas supply as well…
5
…and disconnect the gas supply line if there is not enough slack in the gas line to move the appliance.
6
We recommend placing the range on a piece of cardboard so the appliance can be easily moved.
7
The anti-tip bracket can be mounted to the wall or the floor.
8
Determine where the left or right edge of the range will be positioned in the cabinet opening…
9
…and mark it.
10
Position the bracket so the left or right edge is exactly 15/16th of an inch from the marked edge of the range.
11
Mark the appropriate bracket holes for floor or wall mounting.
12
Using a 1/8th inch diameter drill bit, drill the holes where marked.
13
Align the anti-tip bracket and secure it with two #12 x 15/8 inch screws.
14
Gently move the range close to its final location…
15
…then remove the cardboard from underneath the appliance.
16
Plug the range power cord in…
17
…and connect the gas supply line to the regulator valve if necessary.
18
Now gently push the range into its final location, making sure the rear leg slides into the anti-tip bracket.
19
To confirm this, place a foot against the bottom of the oven door…
20
…and, grasping the side of the control panel, attempt to tilt the range forward.
21
The bracket should immediately prevent the appliance from tipping forward.
Description
This video provides step-by-step instructions for replacing the anti-tip bracket on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the bracket is if the range is not properly secured.
All of the information in this bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this bracket replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Anncr: since repair clinic encourages you to perform this procedure safely, a warning icon will appear when you should use caution.
2
Before you install an anti-tip bracket for your double oven gas range…
3
…make sure the power cord is unplugged and the range has been moved out of the way.
4
Be aware, you may need to shut off the gas supply as well…
5
…and disconnect the gas supply line if there is not enough slack in the gas line to move the appliance.
6
We recommend placing the range on a piece of cardboard so the appliance can be easily moved.
7
The anti-tip bracket can be mounted to the wall or the floor.
8
Determine where the left or right edge of the range will be positioned in the cabinet opening…
9
…and mark it.
10
Position the bracket so the left or right edge is exactly 15/16th of an inch from the marked edge of the range.
11
Mark the appropriate bracket holes for floor or wall mounting.
12
Using a 1/8th inch diameter drill bit, drill the holes where marked.
13
Align the anti-tip bracket and secure it with two #12 x 15/8 inch screws.
14
Gently move the range close to its final location…
15
…then remove the cardboard from underneath the appliance.
16
Plug the range power cord in…
17
…and connect the gas supply line to the regulator valve if necessary.
18
Now gently push the range into its final location, making sure the rear leg slides into the anti-tip bracket.
19
To confirm this, place a foot against the bottom of the oven door…
20
…and, grasping the side of the control panel, attempt to tilt the range forward.
21
The bracket should immediately prevent the appliance from tipping forward.
Applicable Product Model
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com