Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Cooktop Replacement #W10401393 
Kitchenaid Double Oven Gas Range Cooktop Replacement #W10401393
Skill Level
Total Parts Cost
$179.15Estimated Savings
$112.5006:50
- Description
This video provides step-by-step instructions for replacing the cooktop on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the cooktop is if it is damaged.
All of the information in this cooktop replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this cooktop replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Before you replace the cooktop on your double oven gas range…
2
…be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Lift off both grates.
5
Pull off the five control knobs.
6
Open the upper oven door and use a phillips-head screwdriver to unthread the three lower screws securing the manifold panel.
7
Next, unthread the two upper screws securing the panel.
8
With the screws unthreaded, you can lift off the panel.
9
Use an adjustable wrench to unthread the nut to release the gas supply tube from the manifold.
10
Use the phillips-head screwdriver or a quarter-inch nut driver to unthread the front screws securing the cooktop.
11
Lift the cooktop assembly up and support it.
12
Remove all five burner caps.
13
Using the phillips-head screwdriver, unthread the two screws securing the center surface burner cover.
14
Lift off the cover
15
Now use a t-20 torx bit to unthread the two screws securing each burner base.
16
Lift the bases straight up to remove.
17
Now use the phillips-head screwdriver or the quarter-inch nut driver to unthread the screws securing the manifold assembly brackets to the cooktop.
18
Detach the surface igniter wire retainers.
19
You can now fully remove the old cooktop.
20
Install the new cooktop…
21
…by positioning it on the frame.
22
Thread the screws to secure the manifold assembly to the front of the cooktop.
23
Position each orifice assembly…
24
…align the burner base…and thread the screws to secure.
25
You’ll need to secure the center surface burner cover with its own set of screws.
26
Replace the burner caps.
27
Snap the wire retainers onto the front edge of the cooktop.
28
Remove the support and lower the cooktop assembly.
29
Thread and tighten the two front screws.
30
Insert the gas supply tube into the manifold and thread the nut – be careful not to damage the tube by overtightening the nut.
31
Realign the manifold panel on the support brackets.
32
Thread and tighten the upper and lower screws to secure.
33
Replace the control knobs on the valve stems.
34
Reposition the grates.
35
Turn the gas supply back on…
36
…plug the power cord back in or restore the power supply…
37
…and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the cooktop on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the cooktop is if it is damaged.
All of the information in this cooktop replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this cooktop replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Before you replace the cooktop on your double oven gas range…
2
…be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Lift off both grates.
5
Pull off the five control knobs.
6
Open the upper oven door and use a phillips-head screwdriver to unthread the three lower screws securing the manifold panel.
7
Next, unthread the two upper screws securing the panel.
8
With the screws unthreaded, you can lift off the panel.
9
Use an adjustable wrench to unthread the nut to release the gas supply tube from the manifold.
10
Use the phillips-head screwdriver or a quarter-inch nut driver to unthread the front screws securing the cooktop.
11
Lift the cooktop assembly up and support it.
12
Remove all five burner caps.
13
Using the phillips-head screwdriver, unthread the two screws securing the center surface burner cover.
14
Lift off the cover
15
Now use a t-20 torx bit to unthread the two screws securing each burner base.
16
Lift the bases straight up to remove.
17
Now use the phillips-head screwdriver or the quarter-inch nut driver to unthread the screws securing the manifold assembly brackets to the cooktop.
18
Detach the surface igniter wire retainers.
19
You can now fully remove the old cooktop.
20
Install the new cooktop…
21
…by positioning it on the frame.
22
Thread the screws to secure the manifold assembly to the front of the cooktop.
23
Position each orifice assembly…
24
…align the burner base…and thread the screws to secure.
25
You’ll need to secure the center surface burner cover with its own set of screws.
26
Replace the burner caps.
27
Snap the wire retainers onto the front edge of the cooktop.
28
Remove the support and lower the cooktop assembly.
29
Thread and tighten the two front screws.
30
Insert the gas supply tube into the manifold and thread the nut – be careful not to damage the tube by overtightening the nut.
31
Realign the manifold panel on the support brackets.
32
Thread and tighten the upper and lower screws to secure.
33
Replace the control knobs on the valve stems.
34
Reposition the grates.
35
Turn the gas supply back on…
36
…plug the power cord back in or restore the power supply…
37
…and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com