Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Regulator-To-Solenoid Gas Supply Tube Replacement #W10524331 
Kitchenaid Double Oven Gas Range Regulator-To-Solenoid Gas Supply Tube Replacement #W10524331
Skill Level
Total Parts Cost
$31.27Estimated Savings
$112.5003:28
- Description
This video provides step-by-step instructions for replacing the regulator to solenoid gas supply tube on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the tube is if the oven will not light.
All of the information in this tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Before you replace the regulator to solenoid gas supply tube in your double oven gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Pull the range away from the wall so you can access the rear of the appliance.
5
Use a Philips head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
6
Lift the panel up and out to remove.
7
Detach the regulator cover plate.
8
Use an adjustable wrench to unthread the nuts to release the old tubing from the regulator and the shut-off solenoid.
9
Install the new gas supply tubing by inserting the longer end into the shut-off solenoid.
10
Then, hand thread the nut.
11
Insert the shorter end into the regulator and thread the nut.
12
Use the adjustable wrench to tighten the nuts, but be careful not to damage the tube by over tightening.
13
Realign the regulator cover plate.
14
Reposition the rear access panel.
15
Thread and tighten the screws to secure.
16
Turn the gas supply back on.
17
Plug the power cord back in or restore the power supply, and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the regulator to solenoid gas supply tube on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the tube is if the oven will not light.
All of the information in this tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Before you replace the regulator to solenoid gas supply tube in your double oven gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Pull the range away from the wall so you can access the rear of the appliance.
5
Use a Philips head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
6
Lift the panel up and out to remove.
7
Detach the regulator cover plate.
8
Use an adjustable wrench to unthread the nuts to release the old tubing from the regulator and the shut-off solenoid.
9
Install the new gas supply tubing by inserting the longer end into the shut-off solenoid.
10
Then, hand thread the nut.
11
Insert the shorter end into the regulator and thread the nut.
12
Use the adjustable wrench to tighten the nuts, but be careful not to damage the tube by over tightening.
13
Realign the regulator cover plate.
14
Reposition the rear access panel.
15
Thread and tighten the screws to secure.
16
Turn the gas supply back on.
17
Plug the power cord back in or restore the power supply, and the gas range should be ready for use.
Applicable Product Model
Parts Needed
Gas Tube or Connector
$31.27
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com