Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Manifold Gas Supply Replacement #W10642388 
Kitchenaid Double Oven Gas Range Manifold Gas Supply Replacement #W10642388
Skill Level
Total Parts Cost
$134.02Estimated Savings
$112.5005:49
- Description
This video provides step-by-step instructions for replacing the manifold gas supply on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the gas supply is if the surface burners will not light.
All of the information in this supply replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this supply replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Before you replace the manifold gas supply tube in your double oven gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Pull the range away from the wall so you can access the rear of the appliance.
5
Lift off both grates.
6
Pull off the five control knobs.
7
Open the upper oven door and use a Phillips head screwdriver to unthread the three lower screws securing the manifold panel.
8
Next, unthread the two upper screws securing the panel.
9
With the screws unthreaded, you can lift off the panel.
10
Use an adjustable wrench to unthread the nut to release the gas supply tube from the manifold.
11
Use the Phillips head screwdriver or a quarter-inch nut driver to unthread the front screws securing the cooktop.
12
Lift the cooktop assembly up and support it.
13
Next, use the Philips head screwdriver or the quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
14
Lift the panel up and out to remove.
15
Use an adjustable wrench to unthread the nuts securing the gas supply tube to the shut-off solenoid.
16
You can now remove the old tubing.
17
Install the new manifold gas supply tube by feeding the long end under the cooktop.
18
Attach the short end to the shutoff solenoid, then thread the nut.
19
Be careful not to damage the two by over tightening the nut.
20
Reposition the rear access panel.
21
Thread and tighten the screws to secure.
22
Remove the support and lower the cooktop assembly.
23
Thread and tighten the two front screws.
24
Insert the new gas supply tube into the manifold and thread the nut.
25
Again, avoid over-tightening the nut.
26
Realign the manifold panel on the support brackets.
27
Thread and tighten the upper and lower screws to secure.
28
Replace the control knobs on the valve stems.
29
Reposition the grates.
30
Turn the gas supply back on.
31
Plug the power cord back in or restore the power supply, and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the manifold gas supply on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the gas supply is if the surface burners will not light.
All of the information in this supply replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this supply replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Before you replace the manifold gas supply tube in your double oven gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Pull the range away from the wall so you can access the rear of the appliance.
5
Lift off both grates.
6
Pull off the five control knobs.
7
Open the upper oven door and use a Phillips head screwdriver to unthread the three lower screws securing the manifold panel.
8
Next, unthread the two upper screws securing the panel.
9
With the screws unthreaded, you can lift off the panel.
10
Use an adjustable wrench to unthread the nut to release the gas supply tube from the manifold.
11
Use the Phillips head screwdriver or a quarter-inch nut driver to unthread the front screws securing the cooktop.
12
Lift the cooktop assembly up and support it.
13
Next, use the Philips head screwdriver or the quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
14
Lift the panel up and out to remove.
15
Use an adjustable wrench to unthread the nuts securing the gas supply tube to the shut-off solenoid.
16
You can now remove the old tubing.
17
Install the new manifold gas supply tube by feeding the long end under the cooktop.
18
Attach the short end to the shutoff solenoid, then thread the nut.
19
Be careful not to damage the two by over tightening the nut.
20
Reposition the rear access panel.
21
Thread and tighten the screws to secure.
22
Remove the support and lower the cooktop assembly.
23
Thread and tighten the two front screws.
24
Insert the new gas supply tube into the manifold and thread the nut.
25
Again, avoid over-tightening the nut.
26
Realign the manifold panel on the support brackets.
27
Thread and tighten the upper and lower screws to secure.
28
Replace the control knobs on the valve stems.
29
Reposition the grates.
30
Turn the gas supply back on.
31
Plug the power cord back in or restore the power supply, and the gas range should be ready for use.
Applicable Product Model
Parts Needed
Gas Tube or Connector
$134.02
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com