Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Convection Fan Motor Replacement #W10794440 
Kitchenaid Double Oven Gas Range Convection Fan Motor Replacement #W10794440
Skill Level
Total Parts Cost
$163.54Estimated Savings
$112.5007:14
- Description
This video provides step-by-step instructions for replacing the convection fan motor on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the motor is if the convection function will not work.
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Convection Fan Motor Replacement
3
Tools needed: Phillips-head screwdriver, half-inch wrench, number two square drive bit
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
8
Sharp
9
Lift the panel up and out to remove.
10
Now lift up the front of the appliance and support it in the center.
11
Unthread the two lower screws securing the door retaining brackets to the frame.
12
Open the door and unthread the upper screws securing the door retaining brackets.
13
Rotate the hinge locks back
14
Loosen the brackets and use tape to help secure them to the door.
15
Heavy
16
Partially close the door, then lift and pull the door toward you to remove.
17
Remove the support and lower the range.
18
Remove the oven racks.
19
Use a Phillips-head screwdriver to unthread the screws securing the convection fan baffle.
20
Use a half-inch wrench to unthread the convection blade nut clockwise to remove.
21
Sharp
22
Pull off the fan blade.
23
Now use a number two square drive bit to unthread the three mounting screws securing the fan motor.
24
Returning to the rear of the appliance, disconnect the wire connecter and you can fully remove the old fan motor.
25
Prepare the new convection fan motor for installation by transferring the plate and insulation from the old motor to the new one.
26
Now connect the wire connecter and position the new motor on the rear panel.
27
Have an assistant hold it in place as you thread the mounting screws to secure.
28
Align the fan blade then thread the nut counter-clockwise and tighten.
29
Reposition the baffle and replace the screws to hold it in place.
30
Replace the oven racks.
31
Support the front the range, then reinstall the door by inserting the door hinges into the hinge slots.
32
Reposition the retaining brackets and rotate the hinge locks forward.
33
Rethread the upper screws to secure the brackets.
34
Close the door and thread the two lower screws to fully secure the retaining brackets.
35
Remove the support and lower the appliance.
36
Reposition the rear access panel.
37
Thread and tighten the screws to secure.
38
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the convection fan motor on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the motor is if the convection function will not work.
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this motor replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Convection Fan Motor Replacement
3
Tools needed: Phillips-head screwdriver, half-inch wrench, number two square drive bit
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
8
Sharp
9
Lift the panel up and out to remove.
10
Now lift up the front of the appliance and support it in the center.
11
Unthread the two lower screws securing the door retaining brackets to the frame.
12
Open the door and unthread the upper screws securing the door retaining brackets.
13
Rotate the hinge locks back
14
Loosen the brackets and use tape to help secure them to the door.
15
Heavy
16
Partially close the door, then lift and pull the door toward you to remove.
17
Remove the support and lower the range.
18
Remove the oven racks.
19
Use a Phillips-head screwdriver to unthread the screws securing the convection fan baffle.
20
Use a half-inch wrench to unthread the convection blade nut clockwise to remove.
21
Sharp
22
Pull off the fan blade.
23
Now use a number two square drive bit to unthread the three mounting screws securing the fan motor.
24
Returning to the rear of the appliance, disconnect the wire connecter and you can fully remove the old fan motor.
25
Prepare the new convection fan motor for installation by transferring the plate and insulation from the old motor to the new one.
26
Now connect the wire connecter and position the new motor on the rear panel.
27
Have an assistant hold it in place as you thread the mounting screws to secure.
28
Align the fan blade then thread the nut counter-clockwise and tighten.
29
Reposition the baffle and replace the screws to hold it in place.
30
Replace the oven racks.
31
Support the front the range, then reinstall the door by inserting the door hinges into the hinge slots.
32
Reposition the retaining brackets and rotate the hinge locks forward.
33
Rethread the upper screws to secure the brackets.
34
Close the door and thread the two lower screws to fully secure the retaining brackets.
35
Remove the support and lower the appliance.
36
Reposition the rear access panel.
37
Thread and tighten the screws to secure.
38
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com