Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Range Gas Solenoid Replacement #W10911971 
Kitchenaid Double Oven Range Gas Solenoid Replacement #W10911971
Skill Level
Total Parts Cost
$261.26Estimated Savings
$112.5003:34
- Description
This video provides step-by-step instructions for replacing the gas solenoid on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the solenoid is if the range will not light.
All of the information in this solenoid replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this solenoid replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Shut-Off Solenoid Replacement
3
Tools needed: adjustable wrench, quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Use an adjustable wrench to unthread the nuts to release the gas supply tubes from the shut-off solenoid.
13
Disconnect the wires.
14
Use a quarter-inch socket or nut driver to unthread the mounting screws to release the old solenoid.
15
Install the new shut-off solenoid by properly aligning it on the rear panel and inserting the tubes.
16
Thread and tighten the mounting screws.
17
Connect the wires to the terminals.
18
Secure the two gas supply tubes by threading and tightening the nuts ? be careful not to damage the tubes by overtightening the nuts.
19
Reposition the rear access panel
20
Thread and tighten the screws to secure.
21
Turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the gas solenoid on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the solenoid is if the range will not light.
All of the information in this solenoid replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this solenoid replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Shut-Off Solenoid Replacement
3
Tools needed: adjustable wrench, quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Use an adjustable wrench to unthread the nuts to release the gas supply tubes from the shut-off solenoid.
13
Disconnect the wires.
14
Use a quarter-inch socket or nut driver to unthread the mounting screws to release the old solenoid.
15
Install the new shut-off solenoid by properly aligning it on the rear panel and inserting the tubes.
16
Thread and tighten the mounting screws.
17
Connect the wires to the terminals.
18
Secure the two gas supply tubes by threading and tightening the nuts ? be careful not to damage the tubes by overtightening the nuts.
19
Reposition the rear access panel
20
Thread and tighten the screws to secure.
21
Turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Parts Needed
Gas Shut-Off Valve
$261.26
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com