Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Door Lock Assembly Replacement #W11166856 
Kitchenaid Double Oven Gas Range Door Lock Assembly Replacement #W11166856
Skill Level
Total Parts Cost
$137.95Estimated Savings
$112.5003:16
- Description
This video provides step-by-step instructions for replacing the door lock assembly on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the assembly is if the door will not lock properly.
All of the information in this lock replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this lock replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Door Lock Assembly Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Open the appropriate oven door and use a Phillips-head screwdriver to unthread the door latch mounting screws.
8
Next, use the Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
9
Sharp
10
Lift the panel up and out to remove.
11
Depress the tab to disconnect the wire connecter from the lock assembly.
12
Unthread the screw securing the lock assembly to the rear panel.
13
You can now slide the old assembly out.
14
Install the new door lock assembly by inserting it through the rear panel so the door latch protrudes through the hole in the frame.
15
Replace the rear screw to secure the assembly to the rear panel.
16
Connect the wire connecter.
17
Reposition the rear access panel
18
Thread and tighten the screws to secure.
19
Returning to the front of the appliance, thread the mounting screws to hold the door latch in place.
20
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the door lock assembly on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the assembly is if the door will not lock properly.
All of the information in this lock replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this lock replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Door Lock Assembly Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Open the appropriate oven door and use a Phillips-head screwdriver to unthread the door latch mounting screws.
8
Next, use the Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
9
Sharp
10
Lift the panel up and out to remove.
11
Depress the tab to disconnect the wire connecter from the lock assembly.
12
Unthread the screw securing the lock assembly to the rear panel.
13
You can now slide the old assembly out.
14
Install the new door lock assembly by inserting it through the rear panel so the door latch protrudes through the hole in the frame.
15
Replace the rear screw to secure the assembly to the rear panel.
16
Connect the wire connecter.
17
Reposition the rear access panel
18
Thread and tighten the screws to secure.
19
Returning to the front of the appliance, thread the mounting screws to hold the door latch in place.
20
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
06:12
Part Replacement
Kitchenaid Double Oven Gas Range Valve Regulator Assembly Replacement #WPW10546238
05:30
Part Replacement
Kitchenaid Double Oven Gas Range Rear Burner Valve Replacement #W10718182
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com