Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Broil Burner Tube Replacement #W11245221

Kitchenaid Double Oven Gas Range Broil Burner Tube Replacement #W11245221

02:41
This video provides step-by-step instructions for replacing the broil burner tube on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the tube is if the broil burner will not heat.

All of the information in this tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide

Step By Step Instructions

1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Broil Burner Tube Replacement
3
Tools needed: 5/16th inch nut driver, Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Open the upper oven door and remove the rack.
9
Use a Phillips-head screwdriver to unthread the front screw securing the broil burner tube.
10
Sharp
11
Unthread the two wing nuts securing the burner tube shield and detach the shield.
12
Use a 5/16th inch nut driver to unthread the two mounting screws securing the igniter to the tube.
13
Gently detach the igniter and you can remove the old tube.
14
Install the new broil burner tube by aligning the igniter, then thread the mounting screws to secure it.
15
Align the shield and thread the two wing nuts.
16
Fully position the new burner tube on the orifice and thread the front screw to secure.
17
Replace the oven rack.
18
Turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the broil burner tube on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the tube is if the broil burner will not heat.

All of the information in this tube replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Broil Burner Tube Replacement
3
Tools needed: 5/16th inch nut driver, Phillips-head screwdriver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Open the upper oven door and remove the rack.
9
Use a Phillips-head screwdriver to unthread the front screw securing the broil burner tube.
10
Sharp
11
Unthread the two wing nuts securing the burner tube shield and detach the shield.
12
Use a 5/16th inch nut driver to unthread the two mounting screws securing the igniter to the tube.
13
Gently detach the igniter and you can remove the old tube.
14
Install the new broil burner tube by aligning the igniter, then thread the mounting screws to secure it.
15
Align the shield and thread the two wing nuts.
16
Fully position the new burner tube on the orifice and thread the front screw to secure.
17
Replace the oven rack.
18
Turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.

Applicable Product Model

icons/range stove oven
Model
Subtype
Gas
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293