Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Washer/Dryer Combo Lid Switch Assembly Replacement Part # WP3355458
Whirlpool Electric Washer/Dryer Combo Lid Switch Assembly Replacement Part # WP3355458
Skill Level
Total Parts Cost
$54.71Estimated Savings
$112.5005:07
- Description
This video provides step-by-step repair instructions for replacing the lid switch assembly on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the washer will not start.
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the lid switch assembly in your washer / dryer combo…
2
…be sure to unplug the power cord or shut off the power supply.
3
Use a phillips-head screwdriver to unthread the screws securing the lower access panel.
4
Detach the panel and set it aside.
5
Remove the two rear access panel clips
6
Use a quarter-inch socket or nut driver to unthread the screws so you can detach the access panels.
7
Use a short flat-head screwdriver to help detach the spring clips securing the washer’s top panel and lid.
8
Pull the top panel forward then lift up.
9
Set the panel upside-down on a sturdy surface covered with a towel or blanket.
10
Use a phillips-head screwdriver to unthread the mounting screws to release the lid switch.
11
Disconnect the grounding wire.
12
Now detach the lid switch assembly wires from the retaining clips.
13
Use a 5/16th inch socket or nut driver to unthread the screws securing the lid switch assembly wire connecter and grounding wire.
14
Pull the wire connecter free and you can fully remove the old assembly.
15
Install the new lid switch assembly…
16
…by first inserting the wire connecter through the slot on the rear of the top panel.
17
Secure it with the screw.
18
Secure the grounding wire as well.
19
Now secure the assembly wires under the retaining clips.
20
Align the lid switch and thread the mounting screws to hold it in place.
21
Connect the grounding wire to the clip on the panel.
22
Returning to the appliance, realign the top panel and lid on the washer and push the panel straight back.
23
Be aware the lid switch wire connecter on the panel needs to be fully connected with the receptacle on the frame.
24
Reinsert the two spring clips to secure the panel.
25
Reposition the rear access panels and rethread the screws.
26
Reinsert the access panel clips.
27
Reposition the lower access panel and secure it with the screws.
28
Plug the power cord back in or restore the power supply…
29
…and your washer/dryer combo should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the lid switch assembly on a Whirlpool electric washer/dryer combo (model #WET4027EW0). The most common reason for replacing this part is if the washer will not start.
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This replacement video is applicable to the following brands:
Whirlpool, Maytag, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the lid switch assembly in your washer / dryer combo…
2
…be sure to unplug the power cord or shut off the power supply.
3
Use a phillips-head screwdriver to unthread the screws securing the lower access panel.
4
Detach the panel and set it aside.
5
Remove the two rear access panel clips
6
Use a quarter-inch socket or nut driver to unthread the screws so you can detach the access panels.
7
Use a short flat-head screwdriver to help detach the spring clips securing the washer’s top panel and lid.
8
Pull the top panel forward then lift up.
9
Set the panel upside-down on a sturdy surface covered with a towel or blanket.
10
Use a phillips-head screwdriver to unthread the mounting screws to release the lid switch.
11
Disconnect the grounding wire.
12
Now detach the lid switch assembly wires from the retaining clips.
13
Use a 5/16th inch socket or nut driver to unthread the screws securing the lid switch assembly wire connecter and grounding wire.
14
Pull the wire connecter free and you can fully remove the old assembly.
15
Install the new lid switch assembly…
16
…by first inserting the wire connecter through the slot on the rear of the top panel.
17
Secure it with the screw.
18
Secure the grounding wire as well.
19
Now secure the assembly wires under the retaining clips.
20
Align the lid switch and thread the mounting screws to hold it in place.
21
Connect the grounding wire to the clip on the panel.
22
Returning to the appliance, realign the top panel and lid on the washer and push the panel straight back.
23
Be aware the lid switch wire connecter on the panel needs to be fully connected with the receptacle on the frame.
24
Reinsert the two spring clips to secure the panel.
25
Reposition the rear access panels and rethread the screws.
26
Reinsert the access panel clips.
27
Reposition the lower access panel and secure it with the screws.
28
Plug the power cord back in or restore the power supply…
29
…and your washer/dryer combo should be ready for use.
Applicable Product Model
Parts Needed
Lid Switch Assembly
$54.71
Total$0.00
Related Articles & Videos
08:48
Part Replacement
Whirlpool Electric Washer/Dryer Combo Dryer Drive Belt Replacement #661570V
04:26
Part Replacement
Whirlpool Electric Washer/Dryer Combo Heating Element Thermal Fuse Replacement #279769
05:56
Part Replacement
Whirlpool Electric Washer/Dryer Combo Water Inlet Valve Replacement #W10919200
03:57
Part Replacement
Whirlpool Electric Washer/Dryer Combo Heating Element Replacement #WP3387749
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com