Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Oven Temperature Sensor Replacement #W10833885 
Whirlpool Gas Range Oven Temperature Sensor Replacement #W10833885
Skill Level
Total Parts Cost
$105.42Estimated Savings
$112.5002:10
- Description
This video provides step-by-step repair instructions for replacing the oven temperature sensor on a Whirlpool gas range. The most common reason for replacing this part is if the oven will not heat properly.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Oven Temperature Sensor Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a Phillips-head screwdriver or a number two square drive bit to unthread the screws securing the lower rear access panel.
8
Sharp
9
Lift the panel up and out.
10
Depress the tab to disconnect the temperature sensor wire connecter.
11
Unthread the mounting screw and you can remove the old sensor.
12
Install the new oven sensor by inserting it through the hole in the rear panel, then thread the screw to secure.
13
Connect the wire connecter.
14
Reinstall the lower rear access panel.
15
Thread the screws to secure.
16
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven temperature sensor on a Whirlpool gas range. The most common reason for replacing this part is if the oven will not heat properly.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Oven Temperature Sensor Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a Phillips-head screwdriver or a number two square drive bit to unthread the screws securing the lower rear access panel.
8
Sharp
9
Lift the panel up and out.
10
Depress the tab to disconnect the temperature sensor wire connecter.
11
Unthread the mounting screw and you can remove the old sensor.
12
Install the new oven sensor by inserting it through the hole in the rear panel, then thread the screw to secure.
13
Connect the wire connecter.
14
Reinstall the lower rear access panel.
15
Thread the screws to secure.
16
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Parts Needed
Temperature Sensor
$105.42
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
02:43
Part Replacement
Kitchenaid Electric Slide-In Range Oven Sensor Replacement #W10833885
06:00
Part Replacement
KitchenAid Convection Gas Range Temperature Sensor Replacement #W10833885
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com