DescriptionThis video provides step-by-step repair instructions for replacing the left front orifice on a Whirlpool gas range. The most common reason for replacing this part is if the left front burner will not light.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Left Front Orifice Replacement
3
Tools needed: piece of tape, 7mm socket or nut driver
5
Be sure to unplug the power cord or shut off the power supply.
7
Shut off the gas supply as well.
9
Carefully lift off the left side grate.
10
Remove the appropriate burner cap.
11
To help grip the orifice, place a piece of tape in a 7mm socket or nut driver.
12
You can now unthread the old orifice from the holder.
13
Install the new orifice by inserting it into the socket or nut driver, then thread it into the holder.
14
Realign the burner cap.
15
Replace the grate by positioning it on the support and gently lowering it.
16
Turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.