Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Front Leveling Leg Replacement #WPW10341186 
Whirlpool Gas Range Front Leveling Leg Replacement #WPW10341186
Skill Level
Total Parts Cost
$25.96Estimated Savings
$112.5001:44
- Description
This video provides step-by-step repair instructions for replacing the front leveling leg on a Whirlpool gas range. The most common reason for replacing this part is if the range is off-balance.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Front Leveling Leg Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Heavy
7
If applicable, pull the range forward until the rear foot is free of the anti-tip bracket.
8
Have an assistant help you to lift the front of the range up then support it with a wood block or a comparable sturdy object.
9
Pull out the storage drawer and use a Phillips-head screwdriver to unthread the two screws securing the old foot assembly.
10
Install the new front foot assembly by aligning it on the frame, then thread and tighten the two screws to secure.
11
Close the drawer and adjust the new foot so the appliance is level from side-to-side and front-to-back.
12
Reposition the range in the anti-tip bracket if applicable.
13
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the front leveling leg on a Whirlpool gas range. The most common reason for replacing this part is if the range is off-balance.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Front Leveling Leg Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
Heavy
7
If applicable, pull the range forward until the rear foot is free of the anti-tip bracket.
8
Have an assistant help you to lift the front of the range up then support it with a wood block or a comparable sturdy object.
9
Pull out the storage drawer and use a Phillips-head screwdriver to unthread the two screws securing the old foot assembly.
10
Install the new front foot assembly by aligning it on the frame, then thread and tighten the two screws to secure.
11
Close the drawer and adjust the new foot so the appliance is level from side-to-side and front-to-back.
12
Reposition the range in the anti-tip bracket if applicable.
13
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
01:56
Part Replacement
Kitchenaid Electric Slide-In Range Front Foot Replacement #WPW10341186
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com