Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Range Bottom Oven Panel Baffle Replacement #3601P356-45
Whirlpool Gas Range Bottom Oven Panel Baffle Replacement #3601P356-45
Skill Level
Total Parts Cost
$63.75Estimated Savings
$112.5002:50
- Description
This video provides step-by-step repair instructions for replacing the bottom oven panel baffle on a Whirlpool gas range. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step By Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Bottom Oven Panel Baffle Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
For easier access, we recommend removing the oven door by first rotating both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a blanket or towel.
10
Remove the oven racks.
11
Use a Phillips-head screwdriver to unthread the two rear mounting screws securing the bottom panel.
12
Sharp
13
Lift the panel up from the back to remove.
14
Unthread the two screws securing the baffle to the panel.
15
Lift off the old baffle.
16
Install the new baffle by aligning it over the diffuser, then thread the screws to secure.
17
Reinstall the bottom oven panel by aligning the front edge first, then lower the panel and thread the mounting screws.
18
Replace the oven racks.
19
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
20
Lower the door to its fully open position, then rotate the hinge locks forward.
21
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the bottom oven panel baffle on a Whirlpool gas range. The most common reason for replacing this part is if it is damaged or missing.
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
All of the information for this part replacement video is applicable to the following brands:
Whirlpool
Step-By-Step Instructions
1
Whirlpool Gas Range - WFG745H0FS1
2
Gas Range Bottom Oven Panel Baffle Replacement
3
Tools needed: Phillips-head screwdriver
4
Shock Hazard
5
Be sure to unplug the power cord or shut off the power supply.
6
For easier access, we recommend removing the oven door by first rotating both door hinge locks back.
7
Heavy
8
Partially close the door, then lift and pull the door toward you to remove.
9
With the handle side down, set the door on a blanket or towel.
10
Remove the oven racks.
11
Use a Phillips-head screwdriver to unthread the two rear mounting screws securing the bottom panel.
12
Sharp
13
Lift the panel up from the back to remove.
14
Unthread the two screws securing the baffle to the panel.
15
Lift off the old baffle.
16
Install the new baffle by aligning it over the diffuser, then thread the screws to secure.
17
Reinstall the bottom oven panel by aligning the front edge first, then lower the panel and thread the mounting screws.
18
Replace the oven racks.
19
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
20
Lower the door to its fully open position, then rotate the hinge locks forward.
21
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com