DescriptionThis video provides step-by-step repair instructions for replacing the speaker assembly on a Jenn-Air Wine Cellar (Model JUW24FRECX00).
All of the information for this refrigerator speaker assembly replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver & a small flat-head screwdriver.
Step-By-Step Instructions1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX151
2
Wine Cellar Speaker Assembly Replacement
3
heavy, sharp, shock, fragile
5
unplug the power cord to the appliance
6
use a phillips-head screwdriver to unthread the two mounting screws securing the base grille
7
you may need to depress the tabs near the top of the grille to fully release it
9
unthread the screws to release the control board cover
10
disconnect the wire harness
11
peel back the tape and slide the old speaker out of the cover
12
pull off the proximity sensor cover and remove the sensor
13
use a small flat-head screwdriver to pry open the retaining tabs to remove the sensor socket
14
snap the new sensor socket into the control board cover
15
insert the proximity sensor pins into the socket holes and snap on the cover
16
slide the new speaker into the cover and replace the tape to secure the wires
17
connect the wire harness, reposition the cover and thread the screws
18
reinstall the base grille by aligning it on the brackets
19
thread the two mounting screws to secure
21
plug the power cord back in