DescriptionThis video provides step-by-step repair instructions for replacing the bottom rack on a Jenn-Air Wine Cellar (Model JUW24FRECX00).
All of the information for this refrigerator bottom rack replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step-By-Step Instructions1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX184
2
Wine Cellar Bottom Rack Assembly Replacement
3
heavy, sharp, shock, fragile
5
unplug the power cord to the appliance
6
pull the old bottom rack out
7
lift the left side stop lever up while pushing the right side stop lever down to fully remove the rack
8
you will need to remove the full-size rack directly above the bottom rack to reach the slide rail mounting screws
9
using a phillips-head screwdriver, unthread the screws securing the slide rail brackets to the base
10
detach both slide rails
11
prepare the new rack assembly for installation by releasing both slide rails from the rack
12
align the left and right side slide rails on the liner
13
thread the screws through the outside holes in the bracket to secure the left side slide rail to the base
14
the screws should be threaded through the INSIDE holes in the bracket to secure the right side slide rail
15
align the new rack with the slide rails and slide the rack into place
18
plug the power cord back in