Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairThermistor Replacement (part W11238391) - Jenn-Air Wine Cellar
Thermistor Replacement (part W11238391) - Jenn-Air Wine Cellar
Skill Level
Total Parts Cost
$85.74Estimated Savings
$112.5007:11
- Description
This video provides step-by-step repair instructions for replacing the thermistor on a Jenn-Air Wine Cellar (Model JUW24FRECX00). The most common reason for replacing the thermistor is when the refrigerator is not cooling.
All of the information for this refrigerator thermistor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
All of the information for this refrigerator thermistor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step By Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX324
2
Wine Cellar Thermistor Replacement
3
heavy, sharp, shock, fragile
4
Shock
5
unplug the power cord to the appliance
6
uninstall all of the racks by pulling them forward, lifting the left side stop lever while pushing the right side stop lever down
7
remove the tape covering the control panel wires
8
detach the bushing and disconnect the wire connectors
9
using a phillips-head screwdriver, loosen the four control panel assembly mounting screws
10
detach at least three rack slide rails to remove the control panel assembly
11
lift the assembly out and unthread the six mounting screws securing the evaporator cover
12
Sharp
13
pull the cover away
14
cut the zip tie
15
unthread the two mounting screws securing the wiring cover
16
remove the cover
17
disconnect the fan motor wire connecter as well as the defrost thermistor wire connecter and you can fully remove the evaporator cover
18
depress the tabs to remove the cover from the thermistor you're replacing
19
peel back the tape to release the foam block insulation
20
peel back additional tape under the insulation
21
disconnect the wire connecter and remove the old thermistor
22
connect the wire connecter of the new thermistor
23
feed the thermistor through the evaporator cover
24
replace the tape to secure the thermistor and wire connecter
25
replace the insulation and secure with tape
26
align and snap the thermistor cover into place
27
reinstall the evaporator cover by connecting the fan motor wire connecter and the defrost thermistor wire connector
28
replace the wiring cover and secure it with screws
29
use a zip tie to secure the wires
30
fully reposition the evaporator cover and thread the six mounting screws
31
reinstall the control panel assembly by aligning it on the mounting screws and tightening
32
replace the tape to cover the wires
33
reposition the slide rails and reinstall the racks
34
Shock
35
plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the thermistor on a Jenn-Air Wine Cellar (Model JUW24FRECX00). The most common reason for replacing the thermistor is when the refrigerator is not cooling.
All of the information for this refrigerator thermistor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
All of the information for this refrigerator thermistor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step-By-Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX324
2
Wine Cellar Thermistor Replacement
3
heavy, sharp, shock, fragile
4
Shock
5
unplug the power cord to the appliance
6
uninstall all of the racks by pulling them forward, lifting the left side stop lever while pushing the right side stop lever down
7
remove the tape covering the control panel wires
8
detach the bushing and disconnect the wire connectors
9
using a phillips-head screwdriver, loosen the four control panel assembly mounting screws
10
detach at least three rack slide rails to remove the control panel assembly
11
lift the assembly out and unthread the six mounting screws securing the evaporator cover
12
Sharp
13
pull the cover away
14
cut the zip tie
15
unthread the two mounting screws securing the wiring cover
16
remove the cover
17
disconnect the fan motor wire connecter as well as the defrost thermistor wire connecter and you can fully remove the evaporator cover
18
depress the tabs to remove the cover from the thermistor you're replacing
19
peel back the tape to release the foam block insulation
20
peel back additional tape under the insulation
21
disconnect the wire connecter and remove the old thermistor
22
connect the wire connecter of the new thermistor
23
feed the thermistor through the evaporator cover
24
replace the tape to secure the thermistor and wire connecter
25
replace the insulation and secure with tape
26
align and snap the thermistor cover into place
27
reinstall the evaporator cover by connecting the fan motor wire connecter and the defrost thermistor wire connector
28
replace the wiring cover and secure it with screws
29
use a zip tie to secure the wires
30
fully reposition the evaporator cover and thread the six mounting screws
31
reinstall the control panel assembly by aligning it on the mounting screws and tightening
32
replace the tape to cover the wires
33
reposition the slide rails and reinstall the racks
34
Shock
35
plug the power cord back in
Applicable Product Model
Related Articles & Videos
04:41
Part Replacement
Condenser Fan Motor Replacement (part W10772882) - Jenn-Air Wine Cellar
07:17
Part Replacement
Evaporator Fan Motor Replacement (part W10854409) - Jenn-Air Wine Cellar
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com