Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairControl Panel Assembly Replacement (part W11250119) - Jenn-Air Wine Cellar
Control Panel Assembly Replacement (part W11250119) - Jenn-Air Wine Cellar
Skill Level
Total Parts Cost
$349.79Estimated Savings
$112.5005:10
- Description
This video provides step-by-step repair instructions for replacing the control panel on a Jenn-Air Wine Cellar (Model JUW24FRECX00).
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step By Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX348
2
Wine Cellar Control Panel Assembly Replacement
3
heavy, sharp, shock, fragile
4
Shock
5
unplug the power cord to the appliance
6
uninstall all of the racks by pulling them forward, lifting the left side stop lever while pushing the right side stop lever down
7
remove the tape covering the control panel wires
8
detach the bushing and disconnect the wire connectors
9
using a phillips-head screwdriver, loosen the four control panel assembly mounting screws
10
detach at least three rack slide rails to remove the control panel assembly
11
lift the assembly out
12
unthread all of the screws to remove the two bottom covers
13
remove any tape to detach the wire harness then remove the foam block insulation
14
remove the tape securing the wire harness to the new assembly
15
insert the foam block insulation
16
align the wire harness and secure it with the tape
17
position the two bottom cover and thread the screws
18
align the new control panel assembly on the mounting screws and tighten
19
slide the bushing on the control wires, connect the wire connecter and position the wires inside the liner, pushing the bushing into place
20
replace the tape to cover the wires
21
reinstall the slide rails
22
reposition the racks
23
Shock
24
plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the control panel on a Jenn-Air Wine Cellar (Model JUW24FRECX00).
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step-By-Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX348
2
Wine Cellar Control Panel Assembly Replacement
3
heavy, sharp, shock, fragile
4
Shock
5
unplug the power cord to the appliance
6
uninstall all of the racks by pulling them forward, lifting the left side stop lever while pushing the right side stop lever down
7
remove the tape covering the control panel wires
8
detach the bushing and disconnect the wire connectors
9
using a phillips-head screwdriver, loosen the four control panel assembly mounting screws
10
detach at least three rack slide rails to remove the control panel assembly
11
lift the assembly out
12
unthread all of the screws to remove the two bottom covers
13
remove any tape to detach the wire harness then remove the foam block insulation
14
remove the tape securing the wire harness to the new assembly
15
insert the foam block insulation
16
align the wire harness and secure it with the tape
17
position the two bottom cover and thread the screws
18
align the new control panel assembly on the mounting screws and tighten
19
slide the bushing on the control wires, connect the wire connecter and position the wires inside the liner, pushing the bushing into place
20
replace the tape to cover the wires
21
reinstall the slide rails
22
reposition the racks
23
Shock
24
plug the power cord back in
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
04:41
Part Replacement
Condenser Fan Motor Replacement (part W10772882) - Jenn-Air Wine Cellar
07:17
Part Replacement
Evaporator Fan Motor Replacement (part W10854409) - Jenn-Air Wine Cellar
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com