Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Dishwasher Utensil Tray Support Bracket Replacement A00008104 
Electrolux Dishwasher Utensil Tray Support Bracket Replacement A00008104
Skill Level
Total Parts Cost
$35.94Estimated Savings
$112.5001:32
- Description
This video provides step-by-step instructions for replacing the utensil tray support bracket on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step By Step Instructions
1
To replace a utensil trace support bracket in your dishwasher,
2
Pull the top rack out, release the retaining tabs to remove the front stop clips, slide the rack off of the rails, lift out the utensil tray, release the top of the old support bracket (it's still intact), and unhook it from the rack.
3
Install the new support bracket by hooking the bottom clips onto the rack, then snap the top clips into place.
4
Reseat the utensil tray, align the utensil tray's support brackets on the rails, and slide the rack in.
5
Realign the two front stop clips on the rails and snap them into place.
Description
This video provides step-by-step instructions for replacing the utensil tray support bracket on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
To replace a utensil trace support bracket in your dishwasher,
2
Pull the top rack out, release the retaining tabs to remove the front stop clips, slide the rack off of the rails, lift out the utensil tray, release the top of the old support bracket (it's still intact), and unhook it from the rack.
3
Install the new support bracket by hooking the bottom clips onto the rack, then snap the top clips into place.
4
Reseat the utensil tray, align the utensil tray's support brackets on the rails, and slide the rack in.
5
Realign the two front stop clips on the rails and snap them into place.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com