Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Dishwasher Top Wash Arm Support Bearing Replacement 807035801 
Electrolux Dishwasher Top Wash Arm Support Bearing Replacement 807035801
Skill Level
Total Parts Cost
$43.95Estimated Savings
$112.5001:29
- Description
This video provides step-by-step instructions for replacing the top wash arm support bearing on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step By Step Instructions
1
To replace the top wash arm support bearing in your dishwasher…
2
…pull the top rack out.
3
Release the retaining tabs to remove the front stop clips.
4
Slide the rack off of the rails.
5
You can now rotate the old top wash arm support bearing counter-clockwise to remove.
6
Install the new support bearing…
7
…by inserting it into the wash arm…then position the arm on the water supply manifold…
8
…and thread the new bearing on clockwise to secure.
9
Confirm the arm spins freely.
10
Align the utensil tray support brackets on the rails and slide the rack in.
11
Realign the two front stop clips on the rails and snap them into place.
Description
This video provides step-by-step instructions for replacing the top wash arm support bearing on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
To replace the top wash arm support bearing in your dishwasher…
2
…pull the top rack out.
3
Release the retaining tabs to remove the front stop clips.
4
Slide the rack off of the rails.
5
You can now rotate the old top wash arm support bearing counter-clockwise to remove.
6
Install the new support bearing…
7
…by inserting it into the wash arm…then position the arm on the water supply manifold…
8
…and thread the new bearing on clockwise to secure.
9
Confirm the arm spins freely.
10
Align the utensil tray support brackets on the rails and slide the rack in.
11
Realign the two front stop clips on the rails and snap them into place.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com