Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Dishwasher Bottle Wash Arm Replacement 807008602 
Electrolux Dishwasher Bottle Wash Arm Replacement 807008602
Skill Level
Total Parts Cost
$128.45Estimated Savings
$112.5002:26
- Description
This video provides step-by-step instructions for replacing the bottle wash arm on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step By Step Instructions
1
Electrolux Dishwasher - 24ID75SPS3A
2
Dishwasher Bottle Wash Arm Assembly Replacement
3
2, 1, 3",Pull the upper dishrack out
4
Rotate both front stop clips outward to fully remove the rack
5
Detach the wash arm and support from the rack
6
Lower the two front middle tines and detach the tine clips
7
Detach the old bottle wash arm assembly
8
Install the new bottle wash arm assembly by aligning it on the front of the rack and snapping it into place
9
Reposition the front middle tines and secure them with the tine clips
10
Confirm the rubber washer is intact on the wash arm support
11
"Insert the support into the bottle wash arm, align the clips with the rack, and snap the assembly into place"
12
"Realign the upper dishrack rollers on the slide rails, push the rack in and rotate the front stop clips inward"
Description
This video provides step-by-step instructions for replacing the bottle wash arm on Electrolux dishwashers.
All of the information in this video is applicable to the following brands: Electrolux
All of the information in this video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Electrolux Dishwasher - 24ID75SPS3A
2
Dishwasher Bottle Wash Arm Assembly Replacement
3
2, 1, 3",Pull the upper dishrack out
4
Rotate both front stop clips outward to fully remove the rack
5
Detach the wash arm and support from the rack
6
Lower the two front middle tines and detach the tine clips
7
Detach the old bottle wash arm assembly
8
Install the new bottle wash arm assembly by aligning it on the front of the rack and snapping it into place
9
Reposition the front middle tines and secure them with the tine clips
10
Confirm the rubber washer is intact on the wash arm support
11
"Insert the support into the bottle wash arm, align the clips with the rack, and snap the assembly into place"
12
"Realign the upper dishrack rollers on the slide rails, push the rack in and rotate the front stop clips inward"
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com