Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Tubing Connector Replacement DA62-03914A
Samsung Refrigerator Tubing Connector Replacement DA62-03914A
Skill Level
Total Parts Cost
$49.58Estimated Savings
$112.5002:36
- Description
This video provides step-by-step repair instructions for replacing the tubing connector on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or leaking.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the water line tubing connecter on this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Set the cover aside.
6
Next, depress the retaining ring to release the outgoing water line from the tubing connecter.
7
Insert the small flat-head screwdriver into the notch in the tubing connecter cap to detach the cap.
8
You can now depress the incoming water line retaining ring to fully remove the old connecter.
9
To install the new water line tubing connecter…
10
… fully insert the incoming water line into the red end of the connecter…
11
… then snap the cap onto the connecter.
12
Fully insert the outgoing water line into the opposite end of the connecter.
13
Reposition the cover…
14
… and rethread the three mounting screws.
15
Plug the power cord back in…
16
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the tubing connector on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or leaking.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the water line tubing connecter on this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Set the cover aside.
6
Next, depress the retaining ring to release the outgoing water line from the tubing connecter.
7
Insert the small flat-head screwdriver into the notch in the tubing connecter cap to detach the cap.
8
You can now depress the incoming water line retaining ring to fully remove the old connecter.
9
To install the new water line tubing connecter…
10
… fully insert the incoming water line into the red end of the connecter…
11
… then snap the cap onto the connecter.
12
Fully insert the outgoing water line into the opposite end of the connecter.
13
Reposition the cover…
14
… and rethread the three mounting screws.
15
Plug the power cord back in…
16
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Hose Connector
$49.58
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com