Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Lower Hinge Bushing Replacement DA63-06410A
Samsung Refrigerator Lower Hinge Bushing Replacement DA63-06410A
Skill Level
Total Parts Cost
$6.50Estimated Savings
$112.5004:23
- Description
This video provides step-by-step repair instructions for replacing the lower hinge bushing on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace a lower door hinge bushing on this samsung refrigerator…
2
… you will need a phillips-head screwdriver and lithium grease.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Set the cover aside.
6
If replacing the bushing for the left-side door…
7
… pull back the plastic covering then depress the tab to disconnect the large wire harness.
8
Depress the tab to disconnect the small wire harness.
9
If applicable, depress the retaining ring to release the water line from the tubing connecter.
10
If replacing the right-side hinge bushing, simply disconnect the two wire connecters.
11
Have an assistant help to hold the door…
12
… as you release the appropriate upper hinge support.
13
Lift the front of the hinge out of the door first then pull the hinge free of the bracket and detach it from the wires and water line, if applicable.
14
Carefully lift the door off the lower hinge and set it aside.
15
You can now lift off the old hinge bushing.
16
To install the new lower door hinge bushing…
17
… align it on the hinge pin.
18
Apply some lithium grease to the new bushing.
19
Reinstall the door…
20
… by setting it on the bushing.
21
Close the door…
22
… and reinstall the upper hinge by first aligning the wires and, if applicable, the water line in the hinge slot.
23
Insert the rear tab into the bracket then insert the front of the hinge into the door.
24
Align the hinge support on the support bracket and push the support down to secure the hinge.
25
Fully insert the water line in the tubing connecter if necessary.
26
Reconnect the wire harnesses or connecters.
27
Reposition the cover…
28
… and rethread the three mounting screws.
29
Plug the power cord back in…
30
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the lower hinge bushing on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace a lower door hinge bushing on this samsung refrigerator…
2
… you will need a phillips-head screwdriver and lithium grease.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Set the cover aside.
6
If replacing the bushing for the left-side door…
7
… pull back the plastic covering then depress the tab to disconnect the large wire harness.
8
Depress the tab to disconnect the small wire harness.
9
If applicable, depress the retaining ring to release the water line from the tubing connecter.
10
If replacing the right-side hinge bushing, simply disconnect the two wire connecters.
11
Have an assistant help to hold the door…
12
… as you release the appropriate upper hinge support.
13
Lift the front of the hinge out of the door first then pull the hinge free of the bracket and detach it from the wires and water line, if applicable.
14
Carefully lift the door off the lower hinge and set it aside.
15
You can now lift off the old hinge bushing.
16
To install the new lower door hinge bushing…
17
… align it on the hinge pin.
18
Apply some lithium grease to the new bushing.
19
Reinstall the door…
20
… by setting it on the bushing.
21
Close the door…
22
… and reinstall the upper hinge by first aligning the wires and, if applicable, the water line in the hinge slot.
23
Insert the rear tab into the bracket then insert the front of the hinge into the door.
24
Align the hinge support on the support bracket and push the support down to secure the hinge.
25
Fully insert the water line in the tubing connecter if necessary.
26
Reconnect the wire harnesses or connecters.
27
Reposition the cover…
28
… and rethread the three mounting screws.
29
Plug the power cord back in…
30
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Hinge Bearing
$6.50
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com