DescriptionThis video provides step-by-step repair instructions for replacing the right door stop on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions1
To replace the right door stop on this samsung refrigerator…
2
… you will need a phillips-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
6
Disconnect the two wire connecters.
7
Have an assistant help to hold the door…
8
… as you release the upper hinge support.
9
Lift the front of the hinge out of the door first then pull the hinge free of the bracket and detach it from the wires.
10
Carefully lift the door off the lower hinge…
11
… and set it on a towel or blanket.
12
Using the phillips-head screwdriver, unthread the three screws to release the old door stop.
13
To install the new door stop…
14
… align it on the bottom of the door…
15
… and thread the three screws to secure.
16
Confirm the bushing is on the hinge…
17
… then reinstall the door…
18
… by setting it on the bushing.
20
… and reinstall the upper hinge by first aligning the wires in the hinge slot.
21
Insert the rear tab into the bracket then insert the front of the hinge into the door.
22
Align the hinge support on the support bracket and push the support down to secure the hinge.
23
Reconnect the two wire connecters.
25
… and rethread the three mounting screws.
26
Plug the power cord back in…
27
… and the refrigerator should be ready for use.