Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Left Door Stop Replacement DA61-03211A
Samsung Refrigerator Left Door Stop Replacement DA61-03211A
Skill Level
Total Parts Cost
$28.20Estimated Savings
$112.5004:57
- Description
This video provides step-by-step repair instructions for replacing the left door stop on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the left door stop on this samsung refrigerator…
2
… you will need a phillips-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Set the cover aside.
6
Pull back the plastic covering then depress the tab to disconnect the large wire harness.
7
Depress the tab to disconnect the small wire harness.
8
Next, depress the retaining ring to release the water line from the tubing connecter.
9
Have an assistant help to hold the door…
10
… as you release the upper hinge support.
11
Lift the front of the hinge out of the door first then pull the hinge free of the bracket and detach it from the wires and water line.
12
Carefully lift the door off the lower hinge…
13
… and set it on a towel or blanket.
14
Using the phillips-head screwdriver, unthread the three screws to release the old door stop.
15
To install the new door stop…
16
… align it on the bottom of the door…
17
… and thread the three screws to secure.
18
Confirm the bushing is on the hinge…
19
… then reinstall the door…
20
… by setting it on the bushing.
21
Close the door…
22
… and reinstall the upper hinge by first aligning the wires and water line in the hinge slot.
23
Insert the rear tab into the bracket then insert the front of the hinge into the door.
24
Align the hinge support on the support bracket and push the support down to secure the hinge.
25
Fully insert the water line in the tubing connecter.
26
Reconnect the small wire harness as well as the large wire harness.
27
Reposition the cover…
28
… and rethread the three mounting screws.
29
Plug the power cord back in…
30
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the left door stop on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the left door stop on this samsung refrigerator…
2
… you will need a phillips-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Set the cover aside.
6
Pull back the plastic covering then depress the tab to disconnect the large wire harness.
7
Depress the tab to disconnect the small wire harness.
8
Next, depress the retaining ring to release the water line from the tubing connecter.
9
Have an assistant help to hold the door…
10
… as you release the upper hinge support.
11
Lift the front of the hinge out of the door first then pull the hinge free of the bracket and detach it from the wires and water line.
12
Carefully lift the door off the lower hinge…
13
… and set it on a towel or blanket.
14
Using the phillips-head screwdriver, unthread the three screws to release the old door stop.
15
To install the new door stop…
16
… align it on the bottom of the door…
17
… and thread the three screws to secure.
18
Confirm the bushing is on the hinge…
19
… then reinstall the door…
20
… by setting it on the bushing.
21
Close the door…
22
… and reinstall the upper hinge by first aligning the wires and water line in the hinge slot.
23
Insert the rear tab into the bracket then insert the front of the hinge into the door.
24
Align the hinge support on the support bracket and push the support down to secure the hinge.
25
Fully insert the water line in the tubing connecter.
26
Reconnect the small wire harness as well as the large wire harness.
27
Reposition the cover…
28
… and rethread the three mounting screws.
29
Plug the power cord back in…
30
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Door Stop
$28.20
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com