Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Ice Chute Door Cam Replacement
Samsung Refrigerator Ice Chute Door Cam Replacement
Total Parts Cost
$NaN04:10
- Description
This video provides step-by-step repair instructions for replacing the ice chute door cam on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the door will not close or open properly.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the ice chute door cam in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the two mounting screws securing the ice and water dispenser control assembly.
5
With the screws unthreaded, pull the assembly down, disconnect the wire connecter, and release the wire from the retainer.
6
Next, unthread the two screws securing the ice chute flapper and motor assembly.
7
Pull the assembly down…
8
… and use the small flat-head screwdriver to depress the retaining tab on the back side of the wire connecter to disconnect it – this may require some effort.
9
Rotate the old door cam so it opens the flapper then use the small flat-head screwdriver to help pry the cam off of the motor shaft.
10
To install the new ice chute door cam…
11
… lift the flapper and align the cam on the motor shaft.
12
Rotate the cam to engage the switches.
13
Reinstall the ice chute flapper and motor assembly by first reconnecting the wire connecter…
14
… then align the assembly and thread the two mounting screws to secure.
15
Reinstall the dispenser control assembly by reconnecting the wire connecter and securing the wire in the retainer.
16
Feed the water line into the hole in the assembly as you insert the tab on the rear of the funnel into the slot in the dispenser housing.
17
Rethread the screws to secure.
18
Plug the power cord back in…
19
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ice chute door cam on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the door will not close or open properly.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the ice chute door cam in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the two mounting screws securing the ice and water dispenser control assembly.
5
With the screws unthreaded, pull the assembly down, disconnect the wire connecter, and release the wire from the retainer.
6
Next, unthread the two screws securing the ice chute flapper and motor assembly.
7
Pull the assembly down…
8
… and use the small flat-head screwdriver to depress the retaining tab on the back side of the wire connecter to disconnect it – this may require some effort.
9
Rotate the old door cam so it opens the flapper then use the small flat-head screwdriver to help pry the cam off of the motor shaft.
10
To install the new ice chute door cam…
11
… lift the flapper and align the cam on the motor shaft.
12
Rotate the cam to engage the switches.
13
Reinstall the ice chute flapper and motor assembly by first reconnecting the wire connecter…
14
… then align the assembly and thread the two mounting screws to secure.
15
Reinstall the dispenser control assembly by reconnecting the wire connecter and securing the wire in the retainer.
16
Feed the water line into the hole in the assembly as you insert the tab on the rear of the funnel into the slot in the dispenser housing.
17
Rethread the screws to secure.
18
Plug the power cord back in…
19
… and the refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com