Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Reed Switch Assembly Replacement DA34-00043K
Samsung Refrigerator Reed Switch Assembly Replacement DA34-00043K
Skill Level
Total Parts Cost
$85.47Estimated Savings
$112.5003:28
- Description
This video provides step-by-step repair instructions for replacing the reed switch assembly on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the reed switch assembly in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Disconnect the wire connecters so you can fully remove the cover.
6
Next, release the reed switch assembly wires from the retainers.
7
You can now use the small flat-head screwdriver to pull back the retaining tabs to release the two reed switches.
8
To install the new reed switch assembly…
9
… snap both switches into place in the retaining clips…
10
… then secure the wires under the retainers.
11
Reinstall the hinge cover by first connecting the wire connecters.
12
Reposition the cover…
13
… and rethread the three mounting screws.
14
Plug the power cord back in…
15
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the reed switch assembly on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the reed switch assembly in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Use the phillips-head screwdriver to unthread the three mounting screws securing the hinge cover.
5
Disconnect the wire connecters so you can fully remove the cover.
6
Next, release the reed switch assembly wires from the retainers.
7
You can now use the small flat-head screwdriver to pull back the retaining tabs to release the two reed switches.
8
To install the new reed switch assembly…
9
… snap both switches into place in the retaining clips…
10
… then secure the wires under the retainers.
11
Reinstall the hinge cover by first connecting the wire connecters.
12
Reposition the cover…
13
… and rethread the three mounting screws.
14
Plug the power cord back in…
15
… and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Switch
$85.47
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com