Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Power Cord Replacement 3903-001003
Samsung Refrigerator Power Cord Replacement 3903-001003
Skill Level
Total Parts Cost
$88.94Estimated Savings
$112.5003:05
- Description
This video provides step-by-step repair instructions for replacing the power cord on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the refrigerator will not power on.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the power cord on this Samsung refrigerator, you will need a Phillips head screwdriver.
2
Before you begin the procedure, confirm the existing power cord is unplugged.
3
Have an assistant help you to move the refrigerator away from the wall.
4
Unthread the five screws securing the control board access cover using the Phillips head screwdriver.
5
Set the cover aside.
6
Depress the tab to disconnect the power cord wire connector.
7
Detach the grounding wire from the retaining hook, then unthread the screw to release the grounding wire.
8
To fully remove the old cord, to install the new power cord, first thread the screw to secure the grounding wire to the rear panel.
9
Loop the wire onto the retaining hook and connect the power cord wire connector.
10
Replace the access cover and thread the screws to secure.
11
The lower left screw secures the power cord to the cover.
12
The smaller fine threaded screw secures the cover to the grounding block.
13
Move the appliance back against the wall, plug the new power cord in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power cord on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the refrigerator will not power on.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the power cord on this Samsung refrigerator, you will need a Phillips head screwdriver.
2
Before you begin the procedure, confirm the existing power cord is unplugged.
3
Have an assistant help you to move the refrigerator away from the wall.
4
Unthread the five screws securing the control board access cover using the Phillips head screwdriver.
5
Set the cover aside.
6
Depress the tab to disconnect the power cord wire connector.
7
Detach the grounding wire from the retaining hook, then unthread the screw to release the grounding wire.
8
To fully remove the old cord, to install the new power cord, first thread the screw to secure the grounding wire to the rear panel.
9
Loop the wire onto the retaining hook and connect the power cord wire connector.
10
Replace the access cover and thread the screws to secure.
11
The lower left screw secures the power cord to the cover.
12
The smaller fine threaded screw secures the cover to the grounding block.
13
Move the appliance back against the wall, plug the new power cord in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Power Cord
$88.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com