Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Freezer Drawer Gear Shaft Retaining Pin Replacement DA67-02795B
Samsung Refrigerator Freezer Drawer Gear Shaft Retaining Pin Replacement DA67-02795B
Skill Level
Total Parts Cost
$14.77Estimated Savings
$112.5001:22
- Description
This video provides step-by-step repair instructions for replacing the freezer drawer gear shaft retaining pin on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the freezer drawer gear shaft retaining pin on this Samsung refrigerator, you will need a small flathead screwdriver.
2
Before you begin the procedure, unplug the appliance's power cord.
3
Open the freezer drawer and remove both baskets.
4
Now, use the small flathead screwdriver to detach the old gear shaft retaining pin (if still intact).
5
To install the new retaining pin, snap it into place to secure the right side of the gear shaft.
6
Replace the two baskets, plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the freezer drawer gear shaft retaining pin on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the freezer drawer gear shaft retaining pin on this Samsung refrigerator, you will need a small flathead screwdriver.
2
Before you begin the procedure, unplug the appliance's power cord.
3
Open the freezer drawer and remove both baskets.
4
Now, use the small flathead screwdriver to detach the old gear shaft retaining pin (if still intact).
5
To install the new retaining pin, snap it into place to secure the right side of the gear shaft.
6
Replace the two baskets, plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Pin
$14.77
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com