Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator LED Light Assembly Cover Replacement DA63-07816A
Samsung Refrigerator LED Light Assembly Cover Replacement DA63-07816A
Skill Level
Total Parts Cost
$15.66Estimated Savings
$112.5001:19
- Description
This video provides step-by-step repair instructions for replacing the LED light assembly cover on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the LED light assembly cover in this Samsung refrigerator,
2
You will need a small flathead screwdriver.
3
Before you begin the procedure, unplug the appliance's power cord.
4
Open both refrigerator doors and use the small flathead screwdriver to depress the retaining tabs to release the old LED light cover, if still intact.
5
To install the new LED light assembly cover, align the side of the cover where the three retaining tabs are more closely positioned with the rear edge of the opening, then snap the cover into place.
6
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the LED light assembly cover on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the LED light assembly cover in this Samsung refrigerator,
2
You will need a small flathead screwdriver.
3
Before you begin the procedure, unplug the appliance's power cord.
4
Open both refrigerator doors and use the small flathead screwdriver to depress the retaining tabs to release the old LED light cover, if still intact.
5
To install the new LED light assembly cover, align the side of the cover where the three retaining tabs are more closely positioned with the rear edge of the opening, then snap the cover into place.
6
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Cover
$15.66
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com