Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Rocker Switch Replacement 3402-000165

Samsung Refrigerator Rocker Switch Replacement 3402-000165

02:32
This video provides step-by-step repair instructions for replacing the rocker switch on a Samsung Refrigerator (Model RF27T5501SRAA51).

All of the information for this video is applicable to the following brands:
Samsung

Step By Step Instructions

1
To replace the rocker switch in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Open the right-side refrigerator door…
5
… and remove the rocker switch cover.
6
Next, use the phillips-head screwdriver to unthread the screw securing the wire access cover.
7
Remove the cover... and pull the wires free of the retainers to provide enough slack to detach the rocker switch…
8
… then insert the small flat-head screwdriver into the hole to pry the switch free of the bracket.
9
Disconnect the wires to fully release the old switch.
10
To install the new rocker switch…
11
… keep the indicator mark facing upward as you connect the wires to the terminals.
12
Snap the switch into place in the bracket and secure the wires behind the retainers.
13
Reposition the wire access cover and thread the screw.
14
Confirm the rocker switch is in the “on” position… then replace the cover.
15
Plug the power cord back in…
16
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the rocker switch on a Samsung Refrigerator (Model RF27T5501SRAA51).

All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the rocker switch in this samsung refrigerator…
2
… you will need a phillips-head screwdriver and a small flat-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Open the right-side refrigerator door…
5
… and remove the rocker switch cover.
6
Next, use the phillips-head screwdriver to unthread the screw securing the wire access cover.
7
Remove the cover... and pull the wires free of the retainers to provide enough slack to detach the rocker switch…
8
… then insert the small flat-head screwdriver into the hole to pry the switch free of the bracket.
9
Disconnect the wires to fully release the old switch.
10
To install the new rocker switch…
11
… keep the indicator mark facing upward as you connect the wires to the terminals.
12
Snap the switch into place in the bracket and secure the wires behind the retainers.
13
Reposition the wire access cover and thread the screw.
14
Confirm the rocker switch is in the “on” position… then replace the cover.
15
Plug the power cord back in…
16
… and the refrigerator should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos

02:20
Part Replacement
Samsung Refrigerator Ice Maker Drain Tube Replacement DA97-04049S
03:32
Part Replacement
Samsung Refrigerator Condenser Fan Motor Replacement DA97-20025A
02:26
Part Replacement
Samsung Refrigerator Door Switch Replacement DA34-00066C
02:32
Part Replacement
Samsung Refrigerator LED Light Assembly Replacement DA41-00676K
01:38
Part Replacement
Samsung Refrigerator Freezer LED Light Replacement DA41-00676N