DescriptionThis video provides step-by-step repair instructions for replacing the display touchscreen assembly on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the screen will not power up, or the touchscreen is not responding.
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions1
To replace the display touch screen assembly on this Samsung refrigerator,
2
You will need a Phillips head screwdriver and a suction cup capable of moving up to 80 pounds.
3
Before you begin the procedure, unplug the appliance's power cord.
4
Open the right side refrigerator door and remove the upper door bin if necessary.
5
Detach the screw cover, then use the Phillips head screwdriver to unthread the display touch screen assembly mounting screw from the door liner.
6
Next, attach the suction cup to the upper face of the touchscreen.
7
Hold the door in place and pull to detach the touchscreen.
8
Lift the bottom edge of the assembly out of the door and disconnect the three wire connectors to fully remove the old assembly.
9
To install the new display touch screen assembly, first connect the three wire connectors to the appropriate terminals on the back of the touch screen.
10
Align the bottom edge in the door first, then push the screen into position.
11
Open the door and rethread the mounting screw to secure the assembly.
12
Snap the screw cover into place, replace the door bin if applicable, plug the power cord back in, and the refrigerator should be ready for use.