Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Power Board Replacement DA92-00795B

Samsung Refrigerator Power Board Replacement DA92-00795B

03:37
This video provides step-by-step repair instructions for replacing the power board on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the refrigerator will not power on at all.

All of the information for this video is applicable to the following brands:
Samsung

Step By Step Instructions

1
To replace the power board in this samsung refrigerator…
2
… you will need a phillips-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Have an assistant help you to move the refrigerator away from the wall.
5
Unthread the five screws securing the control board access cover using the phillips-head screwdriver.
6
Set the cover aside.
7
Note the orientation of the wire connecters connected to the power board…
8
… then disconnect them.
9
Unthread the screw to release the grounding wire from the grounding block.
10
You can now release the three retaining tabs to detach the old board.
11
To install the new power board…
12
… position the left edge first, then align the board on the mounting pin and snap into place.
13
Connect the wire connecters to the appropriate terminals on the board.
14
Thread the screw to secure the power board grounding wire and the control board grounding wire.
15
Replace the access cover…
16
… and thread the screws to secure.
17
The lower left screw secures the power cord to the cover.
18
The smaller fine-threaded screw secures the cover to the grounding block.
19
Move the appliance back against the wall.
20
Plug the power cord back in…
21
… and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the power board on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if the refrigerator will not power on at all.

All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the power board in this samsung refrigerator…
2
… you will need a phillips-head screwdriver.
3
Before you begin the procedure, unplug the appliance’s power cord.
4
Have an assistant help you to move the refrigerator away from the wall.
5
Unthread the five screws securing the control board access cover using the phillips-head screwdriver.
6
Set the cover aside.
7
Note the orientation of the wire connecters connected to the power board…
8
… then disconnect them.
9
Unthread the screw to release the grounding wire from the grounding block.
10
You can now release the three retaining tabs to detach the old board.
11
To install the new power board…
12
… position the left edge first, then align the board on the mounting pin and snap into place.
13
Connect the wire connecters to the appropriate terminals on the board.
14
Thread the screw to secure the power board grounding wire and the control board grounding wire.
15
Replace the access cover…
16
… and thread the screws to secure.
17
The lower left screw secures the power cord to the cover.
18
The smaller fine-threaded screw secures the cover to the grounding block.
19
Move the appliance back against the wall.
20
Plug the power cord back in…
21
… and the refrigerator should be ready for use.

Applicable Product Model

Parts Needed
Total$0.00

Related Articles & Videos

02:20
Part Replacement
Samsung Refrigerator Ice Maker Drain Tube Replacement DA97-04049S
03:32
Part Replacement
Samsung Refrigerator Condenser Fan Motor Replacement DA97-20025A
02:26
Part Replacement
Samsung Refrigerator Door Switch Replacement DA34-00066C
02:32
Part Replacement
Samsung Refrigerator LED Light Assembly Replacement DA41-00676K
01:38
Part Replacement
Samsung Refrigerator Freezer LED Light Replacement DA41-00676N