Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Refrigerator Display Touchscreen Speaker Replacement 3001-002858
Samsung Refrigerator Display Touchscreen Speaker Replacement 3001-002858
Skill Level
Total Parts Cost
$192.91Estimated Savings
$112.5003:35
- Description
This video provides step-by-step repair instructions for replacing the display touchscreen speaker on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if there is no sound coming from the screen.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step By Step Instructions
1
To replace the display touchscreen assembly speaker on this Samsung refrigerator, you will need a Phillips head screwdriver and a suction cup capable of moving up to 80 pounds.
2
Before you begin the procedure, unplug the appliance's power cord.
3
Open the right side refrigerator door and remove the upper door bin if necessary.
4
Detach the screw cover, then use the Phillips head screwdriver to unthread the display touch screen assembly mounting screw from the door liner.
5
Next, attach the suction cup to the upper face of the touchscreen.
6
Hold the door in place and pull to detach the touchscreen.
7
Lift the bottom edge of the assembly out of the door and disconnect the three wire connectors to fully remove the assembly.
8
Set the assembly face down on a towel or blanket.
9
Lift the speaker straight up to detach.
10
Peel back the tape securing the wiring, then disconnect the wire connector to fully remove the old speaker.
11
To install the new display touchscreen assembly speaker, align it on the posts on the rear of the touchscreen assembly and connect the wire connector to the control board.
12
Secure the wiring under the tape.
13
Reinstall the display touch screen assembly by first reconnecting the three wire connectors to the appropriate terminals on the back of the touchscreen.
14
Align the bottom edge in the door first, then push the screen into position.
15
Open the door and rethread the mounting screw to secure the assembly.
16
Snap the screw cover into place.
17
Replace the door bin if applicable.
18
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the display touchscreen speaker on a Samsung Refrigerator (Model RF27T5501SRAA51). The most common reason for replacing this part is if there is no sound coming from the screen.
All of the information for this video is applicable to the following brands:
Samsung
All of the information for this video is applicable to the following brands:
Samsung
Step-By-Step Instructions
1
To replace the display touchscreen assembly speaker on this Samsung refrigerator, you will need a Phillips head screwdriver and a suction cup capable of moving up to 80 pounds.
2
Before you begin the procedure, unplug the appliance's power cord.
3
Open the right side refrigerator door and remove the upper door bin if necessary.
4
Detach the screw cover, then use the Phillips head screwdriver to unthread the display touch screen assembly mounting screw from the door liner.
5
Next, attach the suction cup to the upper face of the touchscreen.
6
Hold the door in place and pull to detach the touchscreen.
7
Lift the bottom edge of the assembly out of the door and disconnect the three wire connectors to fully remove the assembly.
8
Set the assembly face down on a towel or blanket.
9
Lift the speaker straight up to detach.
10
Peel back the tape securing the wiring, then disconnect the wire connector to fully remove the old speaker.
11
To install the new display touchscreen assembly speaker, align it on the posts on the rear of the touchscreen assembly and connect the wire connector to the control board.
12
Secure the wiring under the tape.
13
Reinstall the display touch screen assembly by first reconnecting the three wire connectors to the appropriate terminals on the back of the touchscreen.
14
Align the bottom edge in the door first, then push the screen into position.
15
Open the door and rethread the mounting screw to secure the assembly.
16
Snap the screw cover into place.
17
Replace the door bin if applicable.
18
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Speaker
$192.91
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com