Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator LED Assembly EAV63332113
LG Refrigerator LED Assembly EAV63332113
Skill Level
Total Parts Cost
$41.16Estimated Savings
$112.5004:33
- Description
This video provides step-by-step repair instructions for replacing the LED assembly in an LG Refrigerator (Model LFCS22520S).
All of the information for this LED assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Jeweler's Flathead Screwdriver
All of the information for this LED assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Jeweler's Flathead Screwdriver
Step By Step Instructions
1
To replace the freezer LED assembly in this LG refrigerator, you will need a jeweler's flathead screwdriver and a Phillips screwdriver or drill driver with a number two Phillips bit.
2
Be sure to unplug the appliance before working with any electrical components.
3
Fully extend out the top freezer tray by lifting the front, then pull out the ice container.
4
Next, pull and lift out the freezer tray.
5
Lift the bottom freezer drawer out from the rear.
6
Use the jeweler's screwdriver to depress the tab on the drawer gear and pull up to detach it from the slide rail.
7
Pull the bar away from the other gear.
8
Loosen and remove the two Phillips screws securing the freezer door and lift it up and out to remove it.
9
Using the jeweler's flathead, pry and pull off the LED assembly's lens cover from the right-hand side.
10
Rotate the assembly to pull it out and depress the tab on the wire harness to release it.
11
To install the new LED assembly, plug in the wire harness and rotate the assembly back into place.
12
Snap in the lens cover by inserting the tab on the left side and push up.
13
Set the freezer door by hooking the connector rails to the sliders.
14
Screw in the two Phillips head screws to secure the door.
15
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail.
16
This can be difficult to align.
17
Place the drawer back inside the freezer, slide the tray back into the guide rails, then insert the ice container.
18
Plug in the appliance.
19
The LG refrigerator should now be ready for use.
Description
This video provides step-by-step repair instructions for replacing the LED assembly in an LG Refrigerator (Model LFCS22520S).
All of the information for this LED assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Jeweler's Flathead Screwdriver
All of the information for this LED assembly replacement video is applicable to the following brands:
LG
Tools needed: Phillips Screwdriver/Drill Driver, Jeweler's Flathead Screwdriver
Step-By-Step Instructions
1
To replace the freezer LED assembly in this LG refrigerator, you will need a jeweler's flathead screwdriver and a Phillips screwdriver or drill driver with a number two Phillips bit.
2
Be sure to unplug the appliance before working with any electrical components.
3
Fully extend out the top freezer tray by lifting the front, then pull out the ice container.
4
Next, pull and lift out the freezer tray.
5
Lift the bottom freezer drawer out from the rear.
6
Use the jeweler's screwdriver to depress the tab on the drawer gear and pull up to detach it from the slide rail.
7
Pull the bar away from the other gear.
8
Loosen and remove the two Phillips screws securing the freezer door and lift it up and out to remove it.
9
Using the jeweler's flathead, pry and pull off the LED assembly's lens cover from the right-hand side.
10
Rotate the assembly to pull it out and depress the tab on the wire harness to release it.
11
To install the new LED assembly, plug in the wire harness and rotate the assembly back into place.
12
Snap in the lens cover by inserting the tab on the left side and push up.
13
Set the freezer door by hooking the connector rails to the sliders.
14
Screw in the two Phillips head screws to secure the door.
15
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail.
16
This can be difficult to align.
17
Place the drawer back inside the freezer, slide the tray back into the guide rails, then insert the ice container.
18
Plug in the appliance.
19
The LG refrigerator should now be ready for use.
Applicable Product Model
Parts Needed
LED Light
$41.16
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com