Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator Left Drawer Slider Replacement 5218JA1010F 
LG Refrigerator Left Drawer Slider Replacement 5218JA1010F
Skill Level
Total Parts Cost
$163.95Estimated Savings
$112.5005:49
- Description
This video provides step-by-step repair instructions for replacing the left drawer slider on an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if the drawer will not slide properly.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step By Step Instructions
1
To replace the left drawer slider in this lg refrigerator…
2
To replace the freezer led assembly in this lg refrigerator…
3
You will need jewelers’ flathead screwdriver a flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
4
You will need a jeweler’s flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
5
Be sure to unplug the appliance before working with any electrical components.
6
Be sure to unplug the appliance before working with any electrical components.
7
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
8
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
9
Next, pull and lift out the freezer tray.
10
Next, pull and lift out the freezer tray.
11
Lift the bottom freezer drawer out from the back.
12
Lift the bottom freezer drawer out from the back.
13
Use the jeweler screwdriver to depress the tab on the drawer gear and pull up to detatch it from the slide rail.
14
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
15
Pull the bar away from the other gear.
16
Using the jeweler’s flathead, pry and pull off the led assembly’s lens cover from the righthand side.
17
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
18
Rotate the assembly to pull it out and depress the tab on the wire harness to release it.
19
Now remove the three screws on the freezer rail and unplug the sensor. pull the rail from the cavity.
20
To install the new led assembly…
21
Using the flathead, release the tab holding the slider and remove it.
22
Plug in the wire harness and rotate the assembly back into place.
23
To install the new drawer slider…
24
Snap in the lens cover by inserting the tab in the left side and push up.
25
Insert the slider into the rail and snap it into place.
26
Set the freezer door by hooking the connector rails to the sliders.
27
Position the rail assembly into the freezer cavity with the back tabs first. plug in the sensor then thread and tighten the three screws.
28
Screw in the two phillips head screws to secure the door.
29
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail. this can be difficult to align.
30
Place the drawer back inside the freezer.
31
Set the freezer door by hooking the connector rails to the sliders.
32
Slide the tray back into the guide rails.
33
Screw in the two phillips head screws to secure the door.
34
Then insert the ice container.
35
Place the drawer back inside the freezer.
36
Plug in the appliance.
37
Slide the tray back into the guide rails.
38
…. and the lg refrigerator should be ready for use.
39
Then insert the ice container.
40
Plug in the appliance.
41
…. and the lg refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the left drawer slider on an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if the drawer will not slide properly.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step-By-Step Instructions
1
To replace the left drawer slider in this lg refrigerator…
2
To replace the freezer led assembly in this lg refrigerator…
3
You will need jewelers’ flathead screwdriver a flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
4
You will need a jeweler’s flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
5
Be sure to unplug the appliance before working with any electrical components.
6
Be sure to unplug the appliance before working with any electrical components.
7
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
8
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
9
Next, pull and lift out the freezer tray.
10
Next, pull and lift out the freezer tray.
11
Lift the bottom freezer drawer out from the back.
12
Lift the bottom freezer drawer out from the back.
13
Use the jeweler screwdriver to depress the tab on the drawer gear and pull up to detatch it from the slide rail.
14
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
15
Pull the bar away from the other gear.
16
Using the jeweler’s flathead, pry and pull off the led assembly’s lens cover from the righthand side.
17
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
18
Rotate the assembly to pull it out and depress the tab on the wire harness to release it.
19
Now remove the three screws on the freezer rail and unplug the sensor. pull the rail from the cavity.
20
To install the new led assembly…
21
Using the flathead, release the tab holding the slider and remove it.
22
Plug in the wire harness and rotate the assembly back into place.
23
To install the new drawer slider…
24
Snap in the lens cover by inserting the tab in the left side and push up.
25
Insert the slider into the rail and snap it into place.
26
Set the freezer door by hooking the connector rails to the sliders.
27
Position the rail assembly into the freezer cavity with the back tabs first. plug in the sensor then thread and tighten the three screws.
28
Screw in the two phillips head screws to secure the door.
29
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail. this can be difficult to align.
30
Place the drawer back inside the freezer.
31
Set the freezer door by hooking the connector rails to the sliders.
32
Slide the tray back into the guide rails.
33
Screw in the two phillips head screws to secure the door.
34
Then insert the ice container.
35
Place the drawer back inside the freezer.
36
Plug in the appliance.
37
Slide the tray back into the guide rails.
38
…. and the lg refrigerator should be ready for use.
39
Then insert the ice container.
40
Plug in the appliance.
41
…. and the lg refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Slide Rail
$163.95
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com