Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator Freezer Door Switch Sensor Replacement EBF61314804 
LG Refrigerator Freezer Door Switch Sensor Replacement EBF61314804
Skill Level
Total Parts Cost
$34.74Estimated Savings
$112.5005:44
- Description
This video provides step-by-step repair instructions for replacing the freezer door switch sensor on an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if the freezer light is not working.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step By Step Instructions
1
To replace the freezer door switch sensor in this lg refrigerator…
2
You will need a jeweler’s flathead screwdriver, a flathead screwdriver, needle nose pliers and a phillips screwdriver or drill driver with a number 2 phiillips bit.
3
Be sure to unplug the appliance before working with any electrical components.
4
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
5
Next, pull and lift out the freezer tray.
6
Lift the bottom freezer drawer out from the back.
7
Use the jeweler’s screwdriver to depress the tab on the drawer gear and pull up to detatch the bar from the slide rail.
8
Pull bar away from the other gear.
9
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
10
Now remove the three screws on the freezer rail and unplug the sensor. pull the rail from the cavity.
11
Using the pliers, squeeze the sides of the sensor to release it.
12
To install the new freezer door switch sensor…
13
Insert and snap the sensor into the rail
14
Position the rail assembly into the freezer cavity with the back tabs first. plug in the sensor then thread and tighten the three screws.
15
Set the freezer door by hooking the connector rails to the sliders.
16
Screw in the two phillips head screws to secure the door.
17
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail. this can be difficult to align.
18
Place the drawer back inside the freezer.
19
Slide the tray back into the guide rails.
20
Then insert the ice container.
21
Plug in the appliance.
22
…. and the lg refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the freezer door switch sensor on an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if the freezer light is not working.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step-By-Step Instructions
1
To replace the freezer door switch sensor in this lg refrigerator…
2
You will need a jeweler’s flathead screwdriver, a flathead screwdriver, needle nose pliers and a phillips screwdriver or drill driver with a number 2 phiillips bit.
3
Be sure to unplug the appliance before working with any electrical components.
4
Fully extend out the top freezer tray by lifting the front. then pull out the ice container.
5
Next, pull and lift out the freezer tray.
6
Lift the bottom freezer drawer out from the back.
7
Use the jeweler’s screwdriver to depress the tab on the drawer gear and pull up to detatch the bar from the slide rail.
8
Pull bar away from the other gear.
9
Loosen and remove the two phillips screws securing the freezer door and lift it up and out to remove it.
10
Now remove the three screws on the freezer rail and unplug the sensor. pull the rail from the cavity.
11
Using the pliers, squeeze the sides of the sensor to release it.
12
To install the new freezer door switch sensor…
13
Insert and snap the sensor into the rail
14
Position the rail assembly into the freezer cavity with the back tabs first. plug in the sensor then thread and tighten the three screws.
15
Set the freezer door by hooking the connector rails to the sliders.
16
Screw in the two phillips head screws to secure the door.
17
Insert the bar into the set gear and snap the gear on the other end into its slot within the slide rail. this can be difficult to align.
18
Place the drawer back inside the freezer.
19
Slide the tray back into the guide rails.
20
Then insert the ice container.
21
Plug in the appliance.
22
…. and the lg refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Door Switch
$34.74
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com