Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLG Refrigerator Condenser Fan Motor Front Support Replacement #5040JA2009A
LG Refrigerator Condenser Fan Motor Front Support Replacement #5040JA2009A
Skill Level
Total Parts Cost
$8.56Estimated Savings
$112.5008:27
- Description
This video provides step-by-step repair instructions for replacing the condenser fan motor front support in an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step By Step Instructions
1
To replace the condenser fan motor front support in this lg refrigerator…
2
You will need a ½” wrench, a flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
3
Unplug the appliance before working with any electrical components.
4
Shut off the water to the appliance.
5
Give yourself access to the backside of the fridge.
6
Use the wrench to loosen and remove the main water line.
7
Unscrew the five phillips head screws on the bottom panel and remove it.
8
Now unscrew the fan shroud assembly.
9
Unplug the fan motor.
10
Use the flathead screwdriver to compress the tabs that secure the fan shroud assembly. then work the assembly out of the cavity being mindful of other internal components.
11
Pull off the fan from the assembly.
12
Unhook the wires and unscrew the two screws on the motor cover and remove the cover.
13
Remove the rear motor support and then remove the motor.
14
Pull out the front motor support.
15
To install the new motor support…
16
Insert the support into the assembly.
17
Set the motor in the fan assembly and place the rear support onto the motor.
18
Set the cover and thread and tighten the two screws. hook the motor wires over the cover.
19
Press the fan onto the motor shaft until fully seated.
20
Carefully insert the assembly into the fridge and set in the tabs.
21
Plug in the harness.
22
Thread and tighten the phillips screw to secure the assembly.
23
Place the bottom panel and secure with the five screws.
24
Fasten the main water line to the inlet valve.
25
Turn the water back on to the appliance.
26
Plug in the appliance.
27
…. and the lg refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan motor front support in an LG Refrigerator (Model LFCS22520S). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
LG
All of the information for this video is applicable to the following brands:
LG
Step-By-Step Instructions
1
To replace the condenser fan motor front support in this lg refrigerator…
2
You will need a ½” wrench, a flathead screwdriver and a phillips screwdriver or drill driver with a number 2 phiillips bit.
3
Unplug the appliance before working with any electrical components.
4
Shut off the water to the appliance.
5
Give yourself access to the backside of the fridge.
6
Use the wrench to loosen and remove the main water line.
7
Unscrew the five phillips head screws on the bottom panel and remove it.
8
Now unscrew the fan shroud assembly.
9
Unplug the fan motor.
10
Use the flathead screwdriver to compress the tabs that secure the fan shroud assembly. then work the assembly out of the cavity being mindful of other internal components.
11
Pull off the fan from the assembly.
12
Unhook the wires and unscrew the two screws on the motor cover and remove the cover.
13
Remove the rear motor support and then remove the motor.
14
Pull out the front motor support.
15
To install the new motor support…
16
Insert the support into the assembly.
17
Set the motor in the fan assembly and place the rear support onto the motor.
18
Set the cover and thread and tighten the two screws. hook the motor wires over the cover.
19
Press the fan onto the motor shaft until fully seated.
20
Carefully insert the assembly into the fridge and set in the tabs.
21
Plug in the harness.
22
Thread and tighten the phillips screw to secure the assembly.
23
Place the bottom panel and secure with the five screws.
24
Fasten the main water line to the inlet valve.
25
Turn the water back on to the appliance.
26
Plug in the appliance.
27
…. and the lg refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Motor Support
$8.56
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com