Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Door Handle Mounting Post Replacement W11449276 
KitchenAid Refrigerator Door Handle Mounting Post Replacement W11449276
Skill Level
Total Parts Cost
$23.60Estimated Savings
$112.5001:54
- Description
This video provides step-by-step repair instructions for replacing the door handle mounting post on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the handle is not secure.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace a door or drawer handle mounting post on this kitchenaid refrigerator, you will need a 1/8th inch allen wrench and a t-25 torx bit.
2
Use the 1/8th inch allen wrench to loosen the two set screws securing the appropriate handle.
3
With the screws loosened, you can fully remove the handle.
4
Now use the t-25 torx bit to unthread the mounting post you’re replacing, if still intact.
5
To install the new handle mounting post, thread it into the door or drawer front and tighten.
6
Realign the handle on the mounting posts, and tighten the set screws.
Description
This video provides step-by-step repair instructions for replacing the door handle mounting post on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the handle is not secure.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace a door or drawer handle mounting post on this kitchenaid refrigerator, you will need a 1/8th inch allen wrench and a t-25 torx bit.
2
Use the 1/8th inch allen wrench to loosen the two set screws securing the appropriate handle.
3
With the screws loosened, you can fully remove the handle.
4
Now use the t-25 torx bit to unthread the mounting post you’re replacing, if still intact.
5
To install the new handle mounting post, thread it into the door or drawer front and tighten.
6
Realign the handle on the mounting posts, and tighten the set screws.
Applicable Product Model
Parts Needed
Handle Support
$23.60
Total$0.00
Related Articles & Videos
03:58
Part Replacement
KitchenAid Refrigerator Ice Dispenser Door Replacement WPW10606117
04:18
Part Replacement
KitchenAid Refrigerator Left Lower Freezer Drawer Glide Replacement W10625067
01:51
Part Replacement
KitchenAid Refrigerator Upper Right Door Hinge Replacement WPW10248409
04:30
Part Replacement
KitchenAid Refrigerator Left Crisper Drawer Glide Replacement W11315181
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com