Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Left Crisper Drawer Glide Replacement W11315181 
KitchenAid Refrigerator Left Crisper Drawer Glide Replacement W11315181
Skill Level
Total Parts Cost
$55.16Estimated Savings
$112.5004:30
- Description
This video provides step-by-step repair instructions for replacing the left crisper drawer glide on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the drawer will not open or close properly.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the left crisper drawer glide in this kitchenaid refrigerator, you will need a small flat-head screwdriver.
2
Your first step is to remove all four glass shelves by lifting the front of each shelf up then detach the bracket tabs from the shelf support to remove.
3
Next, pull the platter shelf forward and lift the platter shelf glass up from underneath to remove.
4
Next, open both crisper drawers, reach in and push the crisper cover glass up and forward from underneath.
5
Close the drawers and remove the glass.
6
Now fully uninstall both crisper drawers by pulling them forward then hold the side support brackets as you push the drawers back to fully detach.
7
You can now lift up the entire platter shelf and crisper cover assembly and pull forward to remove.
8
Next, lift up the front of the crisper drawer glide assembly and pull forward to remove.
9
Use the small flat-head screwdriver to depress the retaining tabs to release the drawer glide trim.
10
Now depress the retaining tab securing the slide rail and slide the rail out.
11
You’re now ready to prepare the new crisper drawer glide for installation.
12
Align the slide rail on the new glide track and push straight back until it snaps into position.
13
Align and snap the glide trim onto the new glide.
14
Now position the glide assembly’s rear notch on the liner’s rear mounting post then lower the front of the assembly onto the front mounting post.
15
Fully reposition the platter shelf and crisper cover assembly in the refrigerator.
16
To reinstall the crisper drawers, pull the side rails out then insert the support bracket tabs into the slots in the side channels of the drawers and push the drawers in.
17
Reinsert the crisper cover glass in the space between the platter shelf and crisper cover and push back until the glass is fully seated in the cover.
18
Realign the platter shelf glass in the frame.
19
Finally, reinstall the glass shelves by hooking the upper bracket tabs into the appropriate slots in the shelf support then lower the front of the shelves.
Description
This video provides step-by-step repair instructions for replacing the left crisper drawer glide on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if the drawer will not open or close properly.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the left crisper drawer glide in this kitchenaid refrigerator, you will need a small flat-head screwdriver.
2
Your first step is to remove all four glass shelves by lifting the front of each shelf up then detach the bracket tabs from the shelf support to remove.
3
Next, pull the platter shelf forward and lift the platter shelf glass up from underneath to remove.
4
Next, open both crisper drawers, reach in and push the crisper cover glass up and forward from underneath.
5
Close the drawers and remove the glass.
6
Now fully uninstall both crisper drawers by pulling them forward then hold the side support brackets as you push the drawers back to fully detach.
7
You can now lift up the entire platter shelf and crisper cover assembly and pull forward to remove.
8
Next, lift up the front of the crisper drawer glide assembly and pull forward to remove.
9
Use the small flat-head screwdriver to depress the retaining tabs to release the drawer glide trim.
10
Now depress the retaining tab securing the slide rail and slide the rail out.
11
You’re now ready to prepare the new crisper drawer glide for installation.
12
Align the slide rail on the new glide track and push straight back until it snaps into position.
13
Align and snap the glide trim onto the new glide.
14
Now position the glide assembly’s rear notch on the liner’s rear mounting post then lower the front of the assembly onto the front mounting post.
15
Fully reposition the platter shelf and crisper cover assembly in the refrigerator.
16
To reinstall the crisper drawers, pull the side rails out then insert the support bracket tabs into the slots in the side channels of the drawers and push the drawers in.
17
Reinsert the crisper cover glass in the space between the platter shelf and crisper cover and push back until the glass is fully seated in the cover.
18
Realign the platter shelf glass in the frame.
19
Finally, reinstall the glass shelves by hooking the upper bracket tabs into the appropriate slots in the shelf support then lower the front of the shelves.
Applicable Product Model
Parts Needed
Drawer Glide
$55.16
Total$0.00
Related Articles & Videos
03:58
Part Replacement
KitchenAid Refrigerator Ice Dispenser Door Replacement WPW10606117
04:18
Part Replacement
KitchenAid Refrigerator Left Lower Freezer Drawer Glide Replacement W10625067
01:54
Part Replacement
KitchenAid Refrigerator Door Handle Mounting Post Replacement W11449276
01:51
Part Replacement
KitchenAid Refrigerator Upper Right Door Hinge Replacement WPW10248409
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com