Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Refrigerator Ice Dispenser Door Replacement WPW10606117 
KitchenAid Refrigerator Ice Dispenser Door Replacement WPW10606117
Skill Level
Total Parts Cost
$133.78Estimated Savings
$112.5003:58
- Description
This video provides step-by-step repair instructions for replacing the ice dispenser door on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step By Step Instructions
1
To replace the ice dispenser door assembly in this kitchenaid refrigerator, you will need a quarter-inch nut driver, two thin putty knives, and painter’s tape.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Apply a strip of painter’s tape directly below the dispenser interface, as well as along the left edge.
4
Now insert the two thin putty knives to pry the left side and botom of the interface away from the door and you can then pull the top edge free.
5
Slide out the retaining clips securing the actuator paddle wire connecters, then disconnect all five wire connecters to fully remove the interface.
6
Unhook the wires from the retaining hook, and use the quarter-inch nut driver to unthread the two screws securing the ice dispenser door assembly.
7
Disconnect the ice dispenser door motor wire connecter, then pull the old assembly from the top to remove.
8
To install the new ice dispenser door assembly, align the lower tabs with the slots then push the assembly into position.
9
Rethread the two screws to secure.
10
Connect the wire connecter then hook the wires behind the retaining hook.
11
Reconnect the wire connecters to the appropriate terminals on the user interface.
12
Secure the actuator paddle wire connecters with the retaining clips.
13
Insert the upper tabs on the interface into the slots in the housing then snap the bottom into place.
14
Remove the tape.
15
Plug the power cord back in, and the refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the ice dispenser door on a KitchenAid Refrigerator (Model KRFF507HPS02). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands: KitchenAid
All of the information for this video is applicable to the following brands: KitchenAid
Step-By-Step Instructions
1
To replace the ice dispenser door assembly in this kitchenaid refrigerator, you will need a quarter-inch nut driver, two thin putty knives, and painter’s tape.
2
Before you begin the procedure, unplug the appliance’s power cord.
3
Apply a strip of painter’s tape directly below the dispenser interface, as well as along the left edge.
4
Now insert the two thin putty knives to pry the left side and botom of the interface away from the door and you can then pull the top edge free.
5
Slide out the retaining clips securing the actuator paddle wire connecters, then disconnect all five wire connecters to fully remove the interface.
6
Unhook the wires from the retaining hook, and use the quarter-inch nut driver to unthread the two screws securing the ice dispenser door assembly.
7
Disconnect the ice dispenser door motor wire connecter, then pull the old assembly from the top to remove.
8
To install the new ice dispenser door assembly, align the lower tabs with the slots then push the assembly into position.
9
Rethread the two screws to secure.
10
Connect the wire connecter then hook the wires behind the retaining hook.
11
Reconnect the wire connecters to the appropriate terminals on the user interface.
12
Secure the actuator paddle wire connecters with the retaining clips.
13
Insert the upper tabs on the interface into the slots in the housing then snap the bottom into place.
14
Remove the tape.
15
Plug the power cord back in, and the refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Dispenser Door
$133.78
Total$0.00
Related Articles & Videos
04:18
Part Replacement
KitchenAid Refrigerator Left Lower Freezer Drawer Glide Replacement W10625067
01:54
Part Replacement
KitchenAid Refrigerator Door Handle Mounting Post Replacement W11449276
01:51
Part Replacement
KitchenAid Refrigerator Upper Right Door Hinge Replacement WPW10248409
04:30
Part Replacement
KitchenAid Refrigerator Left Crisper Drawer Glide Replacement W11315181
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com