If your Hotpoint washer won't agitate, the agitator repair kit is the most likely problem. Worn, stripped, or damaged agitator components can keep the agitator from moving even when the washer fills and runs. If the agitator repair kit looks good, inspect the drive block or bell, which connects the transmission shaft to the agitator. A worn drive block may allow the transmission to move while the agitator barely moves or does not move at all. Next, check the lid switch assembly. On some Hotpoint top-load models, a failed lid switch prevents both agitation and spinning. Make sure the lid is fully closed and that nothing blocks the lid strike from contacting the switch or latch. If your washer is not agitating, also inspect the motor coupling for breaks caused by overloading or wear, then check the drive belt for looseness or damage. Before ordering, enter your washing machine's model number to find the exact replacement part for your specific Hotpoint washer.
01 - Hotpoint Washing Machine Agitator Repair Kit
If the washer won't agitate, replacing the agitator repair kit may solve the problem. The kit contains the agitator components that are most likely to wear out and/or fail. If any of the parts are worn out, stripped, or damaged, replace the kit.
Enter model number to search for the required part specific to your product
The drive block connects the washer transmission to the agitator. If the drive block is worn out, the transmission shaft will still move back and forth, but the agitator will only move slightly or will not move at all. Inspect the drive block for damage. If the drive block is worn out, stripped, or damaged, replace it.
On some models the lid switch assembly prevents the washer from both spinning and agitating when the lid is open. If the lid switch assembly fails, the washer will not spin or agitate. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity when the lid is closed, replace it.
On most top load machines the washer will not agitate or spin without the lid being fully closed. Close the lid after loading the washer and ensure there are no obstructions preventing the lid strike from connecting to the lid switch or latch.
Top Solution
05 - Hotpoint Washing Machine Motor Coupling
The motor coupling connects the motor to the washer transmission. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission. The motor coupling can also fail due to normal wear. Inspect the motor coupling to determine if it is broken. If the motor coupling is broken, replace it.