Tappan Parts

Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.

6-inch electric coil surface element with looped terminals, 1250 watt, 4 turn, black center cap

Evaporator (cooling coil) fan motor assembly with wire harness, 115 volts. *Per manufacturer screw holes in motor are not threaded from the factory, use old screws. See Related Items for self tapping screw. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area.

Surface element control switch for the small surface element

Dishwasher upper rack assembly.

Oven temperature sensor *May require cutting and splicing wire connector from old sensor onto new sensor with porcelain wire nuts

Rinse Aid Dispenser Cap

Range/stove surface element (6-inch). If the surface element won't heat, either the surface element or the surface element switch may be defective. To determine if the surface element is defective, use a multimeter to test it for continuity.

Run capacitor, 250VA 12MF

Electronic oven control board. Also known as electronic clock control. Displays the time of day and controls the oven bake, broil functions.

Oven control board. If the oven does not heat check if the oven igniter is glowing. If so, the board is likely good and the oven igniter is weak and will need to be replaced. If it is not glowing the igniter and gas valve can be tested. If they test ok, then the board is likely the problem.

Drip pan, 6 inches, black

8" porcelain drip pan

Freezer door key + shape

Dishwasher splash shield kit for the tub corners. Its also a good idea to inspect and replace the lower door deflector if needed